Difference between revisions of "4x8 CNC Machine"

From Makers Local 256
Jump to: navigation, search
(Links to Cuttable Pattern Resources: single sheet DIY Book Scanner)
(Links to Cuttable Pattern Resources: Added video assembly manual for DIY Book Scanner)
Line 42: Line 42:
* [http://makeprojects.com/Project/Rok-Bak-Chair/772/1#.T_74Z3AzJow single sheet chair]
* [http://makeprojects.com/Project/Rok-Bak-Chair/772/1#.T_74Z3AzJow single sheet chair]
* [http://diybookscanner.org/forum/viewtopic.php?f=28&t=2652&p=14731 single sheet DIY book scanner from diybookscanner.org]
* [http://diybookscanner.org/forum/viewtopic.php?f=28&t=2652&p=14731 single sheet DIY book scanner from diybookscanner.org]
** [[http://diybookscanner.org/forum/viewtopic.php?f=14&t=2596 video assembly manual]
==Links to CNC Machine Resources==
==Links to CNC Machine Resources==

Revision as of 13:51, 23 January 2013

Fix belt pinching issue, then Cut more Stuff!
Born On:
15:47, 22 March 2012 (CDT)
Last Updated:
13:51, 23 January 2013 (CDT)


This is the project page of a CNC capable of milling 4' x 8' plywood sheets. Update: I have ordered a 52" x 104" (area) Plasma cutting table from eagleplasma. Updates to follow below:


  • 10or11 May 12: Ordered CNC Kit from eagleplasma.com
  • 16 May 12: Kit arrived in 3 boxes (145#, 145#, 95#) - I like to call them Huey, Duey, and Louie
  • 17 May 12: Uncrated the contents. (see below for pictures)
  • 18 May 12: ASSEMBLY
  • 28 May 12: Built Spindle Mount
  • 30 May 12: Calibration
  • 13 Jun 12: First cut: X-Axis had trouble with belt jamming; upped the Amperage to 100%-->20%; Need to play around with one of the pulleys to see if i can keep it from pinching the belt. Opinion: This would not be a problem if I were plasma cutting. The router is adding resistance that the stepper is having trouble adapting to. Worst case scenario: I replace the current NEMA23 stepper with a spare NEMA34 that was used in the old cnc..
  • 27 Dec 12: After a couple of months of not really understanding what was going on, I decided to replace the belts with #25 chain. The Blackfoot CNC uses this system for their systems. It seems to have solved the problems for the x.

Links to Cuttable Pattern Resources

Links to CNC Machine Resources

Assembly Pics

Crate Contents

The crates arrived! the vertical one weighed 95lbs, and the two horizontal ones were 140lbs!
The Gantry box without its cardboard. see the dalek in the background?
The contents of the gantry crate.
The cnc table crate, marked 'bottom'
The cnc table crate contents, marked 'bottom'
The cnc table crate, marked 'top'
The cnc table crate contents, marked 'top'


Of concern: The ground is not connected
Of concern: The power wires seem a bit thin...
Fixed ground. Other wires seem ok.

Assembly Day

The table parts out of their plastic

More to follow once I've resized them.

Bill of Materials

This may be put on hold...

Name Number Price Source
3/8" V Groove Guide Bearing 16 $165 vxb.com
Sub Total $116.83