Difference between revisions of "BPM Personal Modeler 2100"

From Makers Local 256
Jump to: navigation, search
(Added patents, people, overview)
(Added Primer Link)
Line 29: Line 29:
 
* [[http://huntsvillain.com/Images/2009/September2009/IMG_0393%20%28Medium%29.JPG Picture 3]]
 
* [[http://huntsvillain.com/Images/2009/September2009/IMG_0393%20%28Medium%29.JPG Picture 3]]
  
 +
==Links==
 +
* [[http://www.mne.psu.edu/lamancusa/rapidpro/primer/chapter2.htm Rapid Prototyping Primer ]]
 
== Files ==
 
== Files ==
 
* [[File:US4665492.pdf]]
 
* [[File:US4665492.pdf]]

Revision as of 15:32, 27 September 2009

Creator:
Omegix
Status:
Repair
Born On:
13:29, 22 September 2009 (CDT)
Last Updated:
15:32, 27 September 2009 (CDT)

Overview

We were donated a 3D wax printer, BPM Personal Modeler 2100 by Scott Savage of Savage Innovations. This page is a clearinghouse to hold knowledge about this printer as we dig it up and notes/coordination of the repair effort.

Known Issues

  • Wax not streaming out of head when printing. Will flush the wax, but not print with it.

Equipment Details

  • Included computer runs DOS, and the software that operates the machine runs on DOS
  • The motor control boards interface with a custom ISA controller in the machine

People

  • Lead Hackers (Contact before futzing with the hardware or software)
    • Justin(Ratmandu)
    • Tim(crashcartpro)
  • Researchers
    • Mog
    • Strages
    • Bob

Pictures

Links

Files