Makers Local logo

From Makers Local 256
Revision as of 16:00, 6 February 2012 by Candleknight (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Advice for anyone else looking to make a logo-

  • should look when it's both very big, or very very small
  • should look in full color, or simplified to be one color

Here's our logo - it's elsewhere on the site, but I'm putting here because this was the project page and it's easier for me to remember - Thanks nykodemus and preaux for helping the project get to this point. I've just realized there's some clipping issue in this .svg, creases are appearing between shapes. It's invisible on the file on my computer, it may be a firefox issue, I'm going to look into it. If you can see it, let me know what browser and resolution you're using so I can eliminate it.

Ml logo vector.svg

ML-LOGO-NEW copy.svg

Related Information