Open Manufacturing talk

From Makers Local 256
Revision as of 14:48, 24 August 2011 by Cherryblossom (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Creator:
EnabrinTain
Status:
Note Taking
Born On:
18:12, 8 August 2011 (CDT)
Last Updated:
14:48, 24 August 2011 (CDT)

Overview

This is the class/talk Notes page for Phil's How to use the Shop's Various CNC tools Class.


MakerBot (cupcake)

  1. Find design(STL) on Thingiverse
  2. Open in Replicator G
  3. Zero Extruder, raise 10mm
  4. Pre-Heat Extruder and Heated bed
  5. Generate G-Code
  6. Edit G-Code (remove pre-heating section, find/replace the extrusion pauses (M103) )
  7. Print!

Links


Thingiverse

Replicator G

Skeinforge Settings

2x4 CNC Machine

  1. Find DXF (Thingiverse, or elsewhere (cnc zone is a good place)
  2. Open DXF in LazyCam
  3. Select Layer to cut
  4. Generate Offset layer
  5. Assign Toolhead to layers
  6. Assign material thickness
  7. Generate G-Code
  8. Open G-Code in Mach3-Mill
  9. MAKE SURE SCALES ARE LOADED
  10. Center mill
  11. Start Cutting

Reprap/Mendel

  • Nothing here yet!

Related Information