PCB Etching Class

From Makers Local 256
Revision as of 17:30, 3 December 2009 by Omegix (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Basic Event Information

  • Name: PCB Etching Class
  • Organizer\POC: Omegix 17:01, 3 December 2009 (CST)
  • Date: TBD
  • Time: TBD
  • Location: Make Shop
  • Cost to Attend: TBD (need to determine if cost is negligible)


  • Class to teach how to do a home PCB (Printed Circuit Board) Etching.
  • Class will use the "melt the plastic to the board" method vs the UV exposure method. Supposedly this method is cheaper.



Materials Needed

  • PCB Etching Fluid (need to determine if cost is negligible)
  • Copper Plated Boards
  • Drill Press
  • Solder \ Irons (if we want to populated it afterwards)
  • CAD Software (Eagle?)
  • Iron (Like for ironing clothes. Could use one specifically made for this.)
  • Laserjet Printer
    • (Ratmandu has a laserjet 2200 with jetdirect and duplexer that just needs a new cartridge)
    • there's a laser printer at the shop at the front of the room

Not Advertised To

  • Livejournal Huntsville Community
  • Facebook Event
  • Makers Local Web Page
  • NPR Service Announcement
  • Fliers
    • UAH
    • Bandito

Advertised To