Difference between revisions of "Snow machine"

From Makers Local 256
Jump to: navigation, search
(initial commit)
 
m (BoM: Added total cost)
Line 22: Line 22:
 
* ½”female to Garden - QTY 1
 
* ½”female to Garden - QTY 1
 
* Quick connect air fitting - QTY 1
 
* Quick connect air fitting - QTY 1
 +
 +
'''Total Cost:''' $34.33
  
 
===Assembly===
 
===Assembly===

Revision as of 21:42, 23 November 2012

Creator:
strages
Status:
awaiting testing
Born On:
21:41, 23 November 2012 (CST)
Last Updated:
21:42, 23 November 2012 (CDT)

Overview

A specialized nozzle for a water hose that injects air creating a fine mist that under the right conditions makes snow!

SG T-Type

This design comes from [www.snowathome.com/free_plans/SAH-SG_t-type_internal_mix.php snowathome.com] and is the simplest one they have a design for.

BoM

  • ¼” cap - QTY 1
  • 6” x nipple - QTY 1
  • ¼” x Tee - QTY 1
  • ¼” x 90 DEG street elbow - QTY 1
  • ¼” close nipple - QTY 1
  • ¼” mini ball valve - QTY 1
  • 2” x nipple - QTY 1
  • ¼”female x ½”male bushing - QTY 1
  • ½”female to Garden - QTY 1
  • Quick connect air fitting - QTY 1

Total Cost: $34.33

Assembly

SAH SG T Type parts.jpg SAH SG TType.jpg

  • Use teflon tape on all connections.
  • Use a 7/64" drill bit to put a hole in the cap.
    • We had to use a 5/32" bit due to a lack of the one called for. We can always bore it out further if needed.

Pics