View source for Candy Machine 3d Modeled Part

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

BoldItalic

External link (remember http:// prefix)Internal linkEmbedded fileReferenceSignature and timestamp

AdvancedSpecial charactersHelp

Level 2Level 3Level 4Level 5

Heading

FormatBulleted listNumbered listIndentationNo wiki formattingNew line

BigSmallSuperscriptSubscript

InsertPicture galleryTableRedirect

{{Project|Creator=Enabrintain |Status=<onlyinclude>Basking</onlyinclude> <!--LEAVE ONLYINCLUDES FOR STATUS HACK--> |Born On=22:04, 4 October 2011 (CDT) <!--DO NOT EDIT --> |Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT) <!--DO NOT EDIT --> }} ==Overview== So the shop has a candy machine of unknown origin <brimstone: please add origin\> and unfortunately it was missing the plastic parts that allowed us to adjust the amount of candy dispensed per quarter. So we took the one remaining spacer and measured and modeled it and printed it! == Pretty Pictures == {| |[[Image:Blendercandymachine.jpg|thumb|Blender]] |- |[[Image:PartX.jpg|thumb|Printed Part]] |[[Image:PartY.jpg|thumb|Printed Part]] |[[Image:PartZ.jpg|thumb|Printed Part]] |} [[Category:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED-->

Return to Candy Machine 3d Modeled Part.