View source for Door Automation

{{Project|Creator=EnabrinTain
|Status=<onlyinclude> Design </onlyinclude>                                <!--LEAVE ONLYINCLUDES FOR STATUS HACK--> 
|Born On=19:27, 9 January 2012 (CST)                                                                  <!--DO NOT EDIT -->
|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT)              <!--DO NOT EDIT -->
}}

==Overview==
This is an opportunity for a couple of plans to come together.
I want to reproduce the USB Door Auth currently in use at Makers Local 256.
I'd like to design a nicer Arduino shield than the proto-board that we are using at the shop.
I intend to use the Laser to etch the acid-resist mask for the pcb.




[[Category:Put Category Here]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->