View source for RoboMow Restoration

{{Project|Creator=Omegix
|Status=<onlyinclude> Brainstorming </onlyinclude>                                <!--LEAVE ONLYINCLUDES FOR STATUS HACK--> 
|Born On=12:59, 26 January 2015 (CST)                                                                  <!--DO NOT EDIT -->
|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT)              <!--DO NOT EDIT -->
}}

==Overview==
A RoboMow was donated to the make shop.  Here's a place for notes on what it would take to get it running again.

== Parts ==
* Battery Option #1
** Tyler is bringing batteries from Daniel Valdez that we can test in the lawnmower
* Battery Option #2 (It takes two of the batteries listed)
** Cost: $56 x 2  (Total: $112)
** Purchase Source: http://smile.amazon.com/12Volt-18AH-Rechargeable-Sealed-Battery/dp/B0026T40LI/ref=sr_1_3?s=hpc&ie=UTF8&qid=1422299366&sr=1-3&keywords=battery
** Information Source:  http://www.allbatteries.co.uk/tractor-ride-on-lawnmower-battery/robomow/rl555.html
*** Voltage : 12V
*** Minimum capacity : 16Ah
*** Dimensions : 181mm (L) x 76mm (W) x 167mm (H)
**** 7.12" (L) x 2.99" (W) x 6.57" (H) 
* Perimiter Switch 
** Cost
*** New: $100
**** http://www.ebay.com/itm/Robomower-Perimeter-Switch-for-RL500-RL550-RL800-RL850-RL1000-/330701228310?_trksid=p2054897.l4275
*** DIY:  TBD
**** Contacted robomow to ask if the permiter switch just put a low voltage on the wire, or if there was an actual signal message being received by the mower from the perimeter switch. --[[User:Omegix|Omegix]] ([[User talk:Omegix|talk]]) 13:39, 26 January 2015 (CST)





[[Category:Put Category Here]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->