Difference between revisions of "Reprap/SAE Prusa Mendel"
From Makers Local 256
< Reprap
m (added link to reprap wiki) |
m (added some more prices) |
||
| Line 68: | Line 68: | ||
| | | | ||
| (any 608 sealed bearing (Mendel Bearing Kits) such as: http://www.thebigbearingstore.com/servlet/the-1031/608-dsh-2RS-608-dsh-ZZ-Radial-Ball/Detail) - 5972K91 is not a good choice as it is unsealed & $$$$ | | (any 608 sealed bearing (Mendel Bearing Kits) such as: http://www.thebigbearingstore.com/servlet/the-1031/608-dsh-2RS-608-dsh-ZZ-Radial-Ball/Detail) - 5972K91 is not a good choice as it is unsealed & $$$$ | ||
| − | | | + | | 2.61 |
|- | |- | ||
| 1 box (100) | | 1 box (100) | ||
| Line 75: | Line 75: | ||
| Motor Mounting | | Motor Mounting | ||
| 92005A120 (?) | | 92005A120 (?) | ||
| − | | | + | | |
|- | |- | ||
| 2280 mm ~90"/7.5' | | 2280 mm ~90"/7.5' | ||
| Line 97: | Line 97: | ||
These are all ground rods (typically called "Drill Rod" in the US and "Silver Steel" in some other parts of the world), and all make excellent choices for your XYZ rods. The more expensive ones offer no practical benefit, but are listed in case the first option is out of stock. You can also substitute stainless steel rods, but they are generally not quite as smooth, and they will usually be more expensive. Plain steel and galvanized rods are poor choices due to the rough surface finish. | These are all ground rods (typically called "Drill Rod" in the US and "Silver Steel" in some other parts of the world), and all make excellent choices for your XYZ rods. The more expensive ones offer no practical benefit, but are listed in case the first option is out of stock. You can also substitute stainless steel rods, but they are generally not quite as smooth, and they will usually be more expensive. Plain steel and galvanized rods are poor choices due to the rough surface finish. | ||
| − | | | + | | 12.72 |
|- | |- | ||
| 1 | | 1 | ||
| Line 104: | Line 104: | ||
| | | | ||
| 98841A030 (3 foot sections) | | 98841A030 (3 foot sections) | ||
| − | | | + | | 15.89 |
|- | |- | ||
| 4 | | 4 | ||
| Line 111: | Line 111: | ||
| optional, or from a spring loaded pen | | optional, or from a spring loaded pen | ||
| | | | ||
| − | | | + | | Free? |
| + | |- | ||
| + | !scope="row" colspan="5"| Total | ||
| + | | 53.44 | ||
| + | |} | ||
| + | |||
| + | == Other Parts == | ||
| + | {| class="wikitable sortable" border="1" | ||
| + | |+Required | ||
| + | |- | ||
| + | ! scope="col" | Quantity | ||
| + | ! scope="col" | Description | ||
| + | ! scope="col" | Type | ||
| + | ! scope="col" class="unsortable" | Comments | ||
| + | ! scope="col" class="unsortable" | Part # | ||
| + | ! scope="col" class="sortable" | Price # | ||
|- | |- | ||
| 1 | | 1 | ||
| Line 132: | Line 147: | ||
| | | | ||
| | | | ||
| + | |- | ||
|} | |} | ||
| − | |||
[[Category:3D printer]] | [[Category:3D printer]] | ||
[[CAtegory:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | [[CAtegory:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | ||
Revision as of 15:28, 4 August 2011
|
Creator: |
Overview
SAE Prusa Mendel WHAT??!?!?!
http://reprap.org/wiki/SAE_Prusa_Mendel
Parts
| Quantity | Description | Type | Comments | McMaster Part Numbers[1] | McMaster Price |
|---|---|---|---|---|---|
| 1 box (100) | 5/16" nuts | Fastener | 95462A030 (1 box) | 4.56 | |
| 1 box (100) | 5/16" washers | Fastener | Washers are produced with various tolerances so it is recommended that if buying 5/16" washers, one should check that they do not rub against the outer race of the skate bearings. If one can find 1/4" washers that can fit over 5/16" rod (fairly common), those should be used instead. | 90126A030 (1 box) | 4.50 |
| 1 box (100) | #6 washers | Fastener | 90126A509 (1 box) | 1.26 | |
| 1 box (100) | #6 1" screws | Fastener | 90272A153 (1 box) | 3.16 | |
| 1 box (100) | #6 nylock nuts | Fastener | 90631A007 (1 box) | 2.48 | |
| 1 box (100) | 5/16" Fender Washers | Fastener | You only need 6 | 91090A111 (1 box) | 6.26 |
| 3 | 608 Bearing Sets | Bearings | (any 608 sealed bearing (Mendel Bearing Kits) such as: http://www.thebigbearingstore.com/servlet/the-1031/608-dsh-2RS-608-dsh-ZZ-Radial-Ball/Detail) - 5972K91 is not a good choice as it is unsealed & $$$$ | 2.61 | |
| 1 box (100) | M3x10 bolt | Fastener | Motor Mounting | 92005A120 (?) | |
| 2280 mm ~90"/7.5' | Neoprene Belting .200" Pitch, 1/4" | Drive Belt | This is not compatible with the T5 pulley in the git repo (see below) | 7959K24 (?) | |
| 1 | 9 foot smooth rod (NOT GALVANIZED) | X,Y,Z bars | 8890K41 (3 foot sections, $4.05, 0.005"/foot straight)
8893K41 (3 foot sections, $4.30, no straightness spec, one arrived bent) 8888K41 (3 foot sections, $8.53, 0.005"/foot straight) All are +/-0.0005" and may bind on bronze bushings if oversize These are all ground rods (typically called "Drill Rod" in the US and "Silver Steel" in some other parts of the world), and all make excellent choices for your XYZ rods. The more expensive ones offer no practical benefit, but are listed in case the first option is out of stock. You can also substitute stainless steel rods, but they are generally not quite as smooth, and they will usually be more expensive. Plain steel and galvanized rods are poor choices due to the rough surface finish. |
12.72 | |
| 1 | 21 foot threaded rod | Frame | 98841A030 (3 foot sections) | 15.89 | |
| 4 | 7/16" x ~1" springs | optional, or from a spring loaded pen | Free? | ||
| Total | 53.44 | ||||
Other Parts
| Quantity | Description | Type | Comments | Part # | Price # |
|---|---|---|---|---|---|
| 1 | Wade's Geared Extruder | (or any other compatible extruder) | |||
| 5 | Nema 17 Stepper Motors | ||||
| 1 | Standard Mendel electronics + endstops | Gen6, Generation_3_Electronics|Gen3, or anything else compatible |
