Difference between revisions of "Reprap/SAE Prusa Mendel"
m (converted the Electrics part list to wiki format) |
m (updated status) |
||
(13 intermediate revisions by one user not shown) | |||
Line 1: | Line 1: | ||
{{Project|Creator=Jimshoe | {{Project|Creator=Jimshoe | ||
− | |Status=<onlyinclude> | + | |Status=<onlyinclude> Electronics Put Together </onlyinclude> <!--LEAVE ONLYINCLUDES FOR STATUS HACK--> |
|Born On=17:01, 03 August 2011 (CDT) <!--DO NOT EDIT --> | |Born On=17:01, 03 August 2011 (CDT) <!--DO NOT EDIT --> | ||
|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT) <!--DO NOT EDIT --> | |Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT) <!--DO NOT EDIT --> | ||
Line 9: | Line 9: | ||
http://reprap.org/wiki/SAE_Prusa_Mendel | http://reprap.org/wiki/SAE_Prusa_Mendel | ||
+ | |||
+ | == Status == | ||
+ | * Tried to flash the bootloader. Having some problems. Tim is going to look at it some more - '' September 14th 2011'' | ||
+ | * Justin fount a 4k7 resistor on a scrap mother board, took it off, and put on the Gen 6 board. - ''September 6th 2011'' | ||
+ | * Tim completed putting Gen 6 board together - ''September 5th 2011'' | ||
+ | ** Tim also lost a 4k7 resistor | ||
+ | * Ordered Gen 6 Parts - ''August 17th 2011'' | ||
+ | * Bought Gen 6 Board off Ebay - ''August 9th 2011'' | ||
+ | * Hardware parts list mostly completed - ''August 6th 2011'' | ||
+ | * Page started - ''August 3rd 2011'' | ||
== Parts == | == Parts == | ||
Line 151: | Line 161: | ||
== Electronics == | == Electronics == | ||
+ | Prices for Gen6 Board were put on this page on Aug 16 2011 | ||
+ | |||
+ | [http://www.mouser.com:80/ProjectManager/ProjectDetail.aspx?AccessID=415de8debe Mouser Order] | ||
+ | |||
+ | DigiKey sucks for saving orders, so don't waste time, just buy parts first time. | ||
+ | |||
{| class="wikitable sortable" border="1" | {| class="wikitable sortable" border="1" | ||
− | |||
! scope="col" class="unsortable" |Qty | ! scope="col" class="unsortable" |Qty | ||
! scope="col" class="unsortable" |Value | ! scope="col" class="unsortable" |Value | ||
Line 163: | Line 178: | ||
! scope="col" class="unsortable" |Total | ! scope="col" class="unsortable" |Total | ||
|---- | |---- | ||
− | |||
|3 | |3 | ||
| | | | ||
Line 174: | Line 188: | ||
|3.27 | |3.27 | ||
|---- | |---- | ||
− | |||
|6 | |6 | ||
| | | | ||
Line 185: | Line 198: | ||
|5.04 | |5.04 | ||
|---- | |---- | ||
− | |||
|4 | |4 | ||
|10k | |10k | ||
Line 196: | Line 208: | ||
|7.8 | |7.8 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|RS485 | |RS485 | ||
Line 203: | Line 214: | ||
|TE Connectivity 5520251-4 | |TE Connectivity 5520251-4 | ||
| | | | ||
− | | | + | |A31407-ND |
|1.28 | |1.28 | ||
|1.28 | |1.28 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|USB | |USB | ||
Line 215: | Line 225: | ||
|710-61400416121 | |710-61400416121 | ||
|732-2108-ND | |732-2108-ND | ||
− | |2. | + | |2.60 |
− | |2. | + | |2.60 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|ATMEGA644ATQFP44 | |ATMEGA644ATQFP44 | ||
Line 229: | Line 238: | ||
|7.39 | |7.39 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|RESET | |RESET | ||
Line 236: | Line 244: | ||
|Omron B3FS-1000P | |Omron B3FS-1000P | ||
|653-B3FS-1000 | |653-B3FS-1000 | ||
− | | | + | | |
− | |0. | + | |0.49 |
− | |0. | + | |0.49 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|22n | |22n | ||
Line 251: | Line 258: | ||
|0.13 | |0.13 | ||
|---- | |---- | ||
− | |||
|2 | |2 | ||
|22p | |22p | ||
Line 262: | Line 268: | ||
|0.62 | |0.62 | ||
|---- | |---- | ||
− | |||
|0 | |0 | ||
|47p | |47p | ||
Line 273: | Line 278: | ||
|0 | |0 | ||
|---- | |---- | ||
− | |||
|12 | |12 | ||
|100n | |100n | ||
Line 284: | Line 288: | ||
|1.08 | |1.08 | ||
|---- | |---- | ||
− | |||
|9 | |9 | ||
|220p | |220p | ||
Line 290: | Line 293: | ||
|C17, C20, C22, C24, C26, C32, C33, C34, C35 | |C17, C20, C22, C24, C26, C32, C33, C34, C35 | ||
|AVX 0603YC221KAT2A | |AVX 0603YC221KAT2A | ||
− | |||
| | | | ||
− | |0. | + | |0603YC221KAT2A-ND |
− | |0. | + | |0.038 |
+ | |0.34 | ||
|---- | |---- | ||
− | |||
|2 | |2 | ||
|4u7 | |4u7 | ||
Line 301: | Line 303: | ||
|C11, C12 | |C11, C12 | ||
|TDK CGA5L1X7R1E475K | |TDK CGA5L1X7R1E475K | ||
− | |||
| | | | ||
− | |0. | + | |445-5706-1-ND |
− | | | + | |0.53 |
+ | |1.06 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|10u | |10u | ||
Line 313: | Line 314: | ||
|Kemet C1206C106K3PACTU | |Kemet C1206C106K3PACTU | ||
|80-C1206C106K3P | |80-C1206C106K3P | ||
− | | | + | |C1206C106K3PACTU-ND |
− | |0. | + | |0.26 |
− | |0. | + | |0.26 |
|---- | |---- | ||
− | |||
|12 | |12 | ||
|220n | |220n | ||
Line 325: | Line 325: | ||
|810-C3216X7R1E224M | |810-C3216X7R1E224M | ||
| | | | ||
− | |0. | + | |0.12 |
− | | | + | |1.44 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|EEEFK1V101P | |EEEFK1V101P | ||
Line 335: | Line 334: | ||
|Panasonic EEE-FK1V101P | |Panasonic EEE-FK1V101P | ||
|667-EEE-FK1V101P | |667-EEE-FK1V101P | ||
− | | | + | |PCE3835CT-ND |
− | |0. | + | |0.93 |
− | |0. | + | |0.93 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|16MHz | |16MHz | ||
Line 350: | Line 348: | ||
|0.53 | |0.53 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|STPS2L40U | |STPS2L40U | ||
Line 358: | Line 355: | ||
|511-STPS2L40U | |511-STPS2L40U | ||
| | | | ||
− | |0. | + | |0.67 |
− | |0. | + | |0.67 |
|---- | |---- | ||
− | |||
|4 | |4 | ||
|DRV8811 | |DRV8811 | ||
Line 369: | Line 365: | ||
|595-DRV8811PWP | |595-DRV8811PWP | ||
| | | | ||
− | | | + | |6.16 |
− | | | + | |24.64 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|FT232RL | |FT232RL | ||
Line 383: | Line 378: | ||
|4.05 | |4.05 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|L5970D | |L5970D | ||
Line 391: | Line 385: | ||
|511-L5970D | |511-L5970D | ||
| | | | ||
− | |2. | + | |2.33 |
− | |2. | + | |2.33 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|Debug | |Debug | ||
Line 402: | Line 395: | ||
|859-LTST-S220GKT | |859-LTST-S220GKT | ||
| | | | ||
− | |0. | + | |0.12 |
− | |0. | + | |0.12 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|HEAT | |HEAT | ||
Line 413: | Line 405: | ||
|859-LTST-S220GKT | |859-LTST-S220GKT | ||
| | | | ||
− | |0. | + | |0.12 |
− | |0. | + | |0.12 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|Power | |Power | ||
Line 424: | Line 415: | ||
|859-LTST-S220GKT | |859-LTST-S220GKT | ||
| | | | ||
− | |0. | + | |0.12 |
− | |0. | + | |0.12 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|ICSP | |ICSP | ||
Line 438: | Line 428: | ||
|0.24 | |0.24 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|IRF8714PBF | |IRF8714PBF | ||
Line 446: | Line 435: | ||
| | | | ||
|IRF8714TRPBFCT-ND | |IRF8714TRPBFCT-ND | ||
− | |0. | + | |0.96 |
− | |0. | + | |0.96 |
|---- | |---- | ||
− | |||
|6 | |6 | ||
|1k | |1k | ||
Line 460: | Line 448: | ||
|0.3 | |0.3 | ||
|---- | |---- | ||
− | |||
|2 | |2 | ||
|1k8 | |1k8 | ||
Line 471: | Line 458: | ||
|0.08 | |0.08 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|3k6 | |3k6 | ||
Line 482: | Line 468: | ||
|0.04 | |0.04 | ||
|---- | |---- | ||
− | |||
|4 | |4 | ||
|3k9 | |3k9 | ||
Line 493: | Line 478: | ||
|0.16 | |0.16 | ||
|---- | |---- | ||
− | |||
|5 | |5 | ||
|4k7 | |4k7 | ||
Line 504: | Line 488: | ||
|0.2 | |0.2 | ||
|---- | |---- | ||
− | |||
|2 | |2 | ||
|10k | |10k | ||
Line 515: | Line 498: | ||
|0.08 | |0.08 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|11k | |11k | ||
Line 526: | Line 508: | ||
|0.04 | |0.04 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|100k | |100k | ||
Line 537: | Line 518: | ||
|0.04 | |0.04 | ||
|---- | |---- | ||
− | |||
|4 | |4 | ||
|180r | |180r | ||
Line 548: | Line 528: | ||
|0.16 | |0.16 | ||
|---- | |---- | ||
− | |||
|8 | |8 | ||
|220k | |220k | ||
Line 559: | Line 538: | ||
|0.32 | |0.32 | ||
|---- | |---- | ||
− | |||
|1 | |1 | ||
|270r | |270r | ||
Line 570: | Line 548: | ||
|0.04 | |0.04 | ||
|---- | |---- | ||
− | |||
|8 | |8 | ||
|0r22 | |0r22 | ||
Line 578: | Line 555: | ||
|71-RCWE1210R220FKEA | |71-RCWE1210R220FKEA | ||
| | | | ||
− | | | + | |1.82 |
− | | | + | |14.56 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|SN75176AD | |SN75176AD | ||
Line 589: | Line 565: | ||
|595-SN75176ADR | |595-SN75176ADR | ||
| | | | ||
− | |0. | + | |0.80 |
− | |0. | + | |0.80 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|POWER | |POWER | ||
Line 600: | Line 575: | ||
|538-39502-1002 | |538-39502-1002 | ||
| | | | ||
− | | | + | |0.50 |
− | | | + | |0.50 |
|---- | |---- | ||
− | |||
|1 | |1 | ||
|744066221 | |744066221 | ||
Line 609: | Line 583: | ||
|L1 | |L1 | ||
|Wurth 744066221 | |Wurth 744066221 | ||
− | | | + | | |
|732-1084-1-ND | |732-1084-1-ND | ||
− | | | + | |2.88 |
− | | | + | |2.88 |
|---- | |---- | ||
− | !scope="row" colspan=" | + | !scope="row" colspan="8"| Total |
− | | | + | | 88.25 |
|} | |} | ||
+ | |||
== Electronics/Non-PCB Components (Sensor, Motor, and Power Connectors) == | == Electronics/Non-PCB Components (Sensor, Motor, and Power Connectors) == | ||
{| class="wikitable sortable" border="1" | {| class="wikitable sortable" border="1" | ||
− | |||
! scope="col" class="unsortable" |Qty | ! scope="col" class="unsortable" |Qty | ||
! scope="col" class="unsortable" |Value | ! scope="col" class="unsortable" |Value | ||
Line 631: | Line 605: | ||
|---- | |---- | ||
|1 | |1 | ||
− | |||
| | | | ||
|Mating Connector for 12V-24V Power Supply | |Mating Connector for 12V-24V Power Supply | ||
|Molex 39500-0002 | |Molex 39500-0002 | ||
+ | | | ||
|538-39500-0002 | |538-39500-0002 | ||
| | | | ||
|1.37 | |1.37 | ||
|1.37 | |1.37 | ||
− | |||
|---- | |---- | ||
− | | | + | |2 |
− | + | ||
| | | | ||
|4-Pin, Male headers for Motors/Heater/I2C | |4-Pin, Male headers for Motors/Heater/I2C | ||
|Molex 22-01-3047 | |Molex 22-01-3047 | ||
+ | | | ||
|538-22-01-3047 | |538-22-01-3047 | ||
| | | | ||
|0.35 | |0.35 | ||
|2.1 | |2.1 | ||
− | |||
|---- | |---- | ||
|3 | |3 | ||
− | |||
| | | | ||
|5-Pin, Male Headers for End-Stop Sensors | |5-Pin, Male Headers for End-Stop Sensors | ||
|Molex 22-01-3057 | |Molex 22-01-3057 | ||
+ | | | ||
|538-22-01-3057 | |538-22-01-3057 | ||
| | | | ||
|0.36 | |0.36 | ||
|1.08 | |1.08 | ||
− | |||
|---- | |---- | ||
− | | | + | |11 |
− | + | ||
| | | | ||
|Gold-Plated Molex Pins for headers | |Gold-Plated Molex Pins for headers | ||
|Molex 08-55-0101 | |Molex 08-55-0101 | ||
+ | | | ||
|538-08-55-0101 | |538-08-55-0101 | ||
| | | | ||
|0.11 | |0.11 | ||
|4.29 | |4.29 | ||
− | |||
|---- | |---- | ||
|3 | |3 | ||
− | |||
| | | | ||
|X/Y/Z-Axis Opto Sensors (or use microswitches) | |X/Y/Z-Axis Opto Sensors (or use microswitches) | ||
|Vishay Semiconductors TCST2103 | |Vishay Semiconductors TCST2103 | ||
+ | | | ||
|782-TCST2103 | |782-TCST2103 | ||
| | | | ||
|1.26 | |1.26 | ||
|3.78 | |3.78 | ||
− | |||
|---- | |---- | ||
− | !scope="row" colspan=" | + | !scope="row" colspan="8"| Total |
− | | | + | | 12.62 |
|} | |} | ||
+ | |||
== Purchased == | == Purchased == | ||
* Generation 6 Board - $15 | * Generation 6 Board - $15 | ||
** [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140576645191&category=4660&_trksid=p5197.c0.m619 ebay link] | ** [http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140576645191&category=4660&_trksid=p5197.c0.m619 ebay link] | ||
** [[media:Gen6_Files.zip|Gen6_Files.zip]] | ** [[media:Gen6_Files.zip|Gen6_Files.zip]] | ||
− | ** | + | ** [https://lh5.googleusercontent.com/-4NyEat-DGbo/TkVF_yFl10I/AAAAAAAAAiI/34B2zSDmeSY/s912/IMG_20110812_102516.jpg Pic] of blank board |
+ | ** [https://lh4.googleusercontent.com/-wY9FhiJ3fYw/TmbIuIp-GhI/AAAAAAAAAks/eVG4YCHNb1Q/s912/IMG_20110906_202011.jpg Pic] of completed board | ||
+ | |||
+ | == Software == | ||
+ | * Bootloader | ||
+ | ** http://reprap.org/wiki/Burning_the_Sanguino_Bootloader | ||
+ | * Firmware | ||
+ | ** https://github.com/kliment/Sprinter | ||
+ | ** http://www.mendel-parts.com/downloads/firmware/_MENDEL/GEN6/ | ||
+ | ** sprinter + printrun + SFACT | ||
+ | *** printrun is the host software, and SFACT is a modified slicer just for repraps | ||
[[Category:3D printer]] | [[Category:3D printer]] | ||
[[CAtegory:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | [[CAtegory:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> |
Latest revision as of 22:40, 14 September 2011
Creator: |
Contents
[hide]Overview
SAE Prusa Mendel WHAT??!?!?!
http://reprap.org/wiki/SAE_Prusa_Mendel
Status
- Tried to flash the bootloader. Having some problems. Tim is going to look at it some more - September 14th 2011
- Justin fount a 4k7 resistor on a scrap mother board, took it off, and put on the Gen 6 board. - September 6th 2011
- Tim completed putting Gen 6 board together - September 5th 2011
- Tim also lost a 4k7 resistor
- Ordered Gen 6 Parts - August 17th 2011
- Bought Gen 6 Board off Ebay - August 9th 2011
- Hardware parts list mostly completed - August 6th 2011
- Page started - August 3rd 2011
Parts
Quantity | Description | Type | Comments | McMaster Part Numbers[1] | McMaster Price |
---|---|---|---|---|---|
1 box (100) | 5/16" nuts | Fastener | 95462A030 (1 box) | 4.56 | |
1 box (100) | 5/16" washers | Fastener | Washers are produced with various tolerances so it is recommended that if buying 5/16" washers, one should check that they do not rub against the outer race of the skate bearings. If one can find 1/4" washers that can fit over 5/16" rod (fairly common), those should be used instead. | 90126A030 (1 box) | 4.50 (maybe need to look at 1/4" washers) |
1 box (100) | #6 washers | Fastener | 90126A509 (1 box) | 1.26 | |
1 box (100) | #6 1" screws | Fastener | 90272A153 (1 box) | 3.16 | |
1 box (100) | #6 nylock nuts | Fastener | 90631A007 (1 box) | 2.48 | |
1 box (100) | 5/16" Fender Washers | Fastener | You only need 6 | 91090A111 (1 box) | 6.26 |
3 | 608 Bearing Sets | Bearings | (any 608 sealed bearing (Mendel Bearing Kits) such as: http://www.thebigbearingstore.com/servlet/the-1031/608-dsh-2RS-608-dsh-ZZ-Radial-Ball/Detail) - 5972K91 is not a good choice as it is unsealed & $$$$ | 2.61 | |
1 box (100) | M3x10 bolt | Fastener | Motor Mounting | 92005A120 (?) | 2.30 |
2280 mm ~90"/7.5' | Neoprene Belting .200" Pitch, 1/4" | Drive Belt | This is not compatible with the T5 pulley in the git repo (see below) | 7959K24 (?) | 14.96 |
1 | 9 foot smooth rod (NOT GALVANIZED) | X,Y,Z bars | 8890K41 (3 foot sections, $4.05, 0.005"/foot straight)
8893K41 (3 foot sections, $4.30, no straightness spec, one arrived bent) 8888K41 (3 foot sections, $8.53, 0.005"/foot straight) All are +/-0.0005" and may bind on bronze bushings if oversize These are all ground rods (typically called "Drill Rod" in the US and "Silver Steel" in some other parts of the world), and all make excellent choices for your XYZ rods. The more expensive ones offer no practical benefit, but are listed in case the first option is out of stock. You can also substitute stainless steel rods, but they are generally not quite as smooth, and they will usually be more expensive. Plain steel and galvanized rods are poor choices due to the rough surface finish. |
12.72 | |
1 | 21 foot threaded rod | Frame | 98841A030 (3 foot sections) | 15.89 | |
4 | 7/16" x ~1" springs | optional, or from a spring loaded pen | Free? | ||
Total | 70.70 |
Other Parts
Quantity | Description | Type | Comments | Part # | Price # |
---|---|---|---|---|---|
1 | Wade's Geared Extruder | (or any other compatible extruder) | |||
5 | Nema 17 Stepper Motors | Ebay | ~50.00 | ||
1 | Standard Mendel electronics + endstops | Gen6, Generation_3_Electronics|Gen3, or anything else compatible |
Electronics
Prices for Gen6 Board were put on this page on Aug 16 2011
DigiKey sucks for saving orders, so don't waste time, just buy parts first time.
Qty | Value | Device | Parts | Manufacturer Part No. | Mouser | DigiKey | Price ea | Total |
---|---|---|---|---|---|---|---|---|
3 | 61900511121 | CON4, 6, 7 | Wurth 61900511121 | 732-2698-ND | 1.09 | 3.27 | ||
6 | 61900411121 | CON1, CON9, CON10, CON11, CON12, CON13 | Wurth 61900411121 | 732-2697-ND | 0.84 | 5.04 | ||
4 | 10k | 3314G-1 | R27, R28, R29, R30 | Bourns 3314G-1-103E | 652-3314G-1-103E | 1.95 | 7.8 | |
1 | RS485 | 520251-4 | CON2 | TE Connectivity 5520251-4 | A31407-ND | 1.28 | 1.28 | |
1 | USB | 61400416121_GND | CON3 | Wurth 61400416121 | 710-61400416121 | 732-2108-ND | 2.60 | 2.60 |
1 | ATMEGA644ATQFP44 | ATMEGA644ATQFP44 | IC3 | Atmel ATMEGA644PA-AU | ATMEGA644PA-AU-ND | 7.39 | 7.39 | |
1 | RESET | B3FS-10XX | S1 | Omron B3FS-1000P | 653-B3FS-1000 | 0.49 | 0.49 | |
1 | 22n | C-EUC0603 | C18 | TDK CGA3E2X8R1H223K | 810-CGA3E2X8R1H223K | 0.13 | 0.13 | |
2 | 22p | C-EUC0603 | C1, C2 | Kemet C0603C220J4GACTU | 80-C0603C220J4G | 0.31 | 0.62 | |
0 | 47p | C-EUC0603 | C41, C42 | DO NOT PLACE | DO NOT PLACE | DO NOT PLACE | 0 | |
12 | 100n | C-EUC0603 | C3, C4, C5, C7, C8, C9, C10, C19, C21, C23, C25, C40 | Kemet C0603C104K3RACTU | 80-C0603C104K3R | 0.09 | 1.08 | |
9 | 220p | C-EUC0603 | C17, C20, C22, C24, C26, C32, C33, C34, C35 | AVX 0603YC221KAT2A | 0603YC221KAT2A-ND | 0.038 | 0.34 | |
2 | 4u7 | C-EUC1206 | C11, C12 | TDK CGA5L1X7R1E475K | 445-5706-1-ND | 0.53 | 1.06 | |
1 | 10u | C-EUC1206 | C6 | Kemet C1206C106K3PACTU | 80-C1206C106K3P | C1206C106K3PACTU-ND | 0.26 | 0.26 |
12 | 220n | C-EUC1206 | C13, C14, C15, C16, C28, C29, C30, C31, C36, C37, C38, C39 | TDK C3216X7R1E224MT | 810-C3216X7R1E224M | 0.12 | 1.44 | |
1 | EEEFK1V101P | CPOL-EUF | C27 | Panasonic EEE-FK1V101P | 667-EEE-FK1V101P | PCE3835CT-ND | 0.93 | 0.93 |
1 | 16MHz | CRYSTALHC49UP | Q1 | TXC Corporation 9C-16.000MAAJ-T | 887-1059-1-ND | 0.53 | 0.53 | |
1 | STPS2L40U | DIODE-SMB | D1 | STMicroelectronics STPS2L40U | 511-STPS2L40U | 0.67 | 0.67 | |
4 | DRV8811 | DRV8811 | IC5, IC6, IC7, IC8 | Texas Instruments DRV8811PWP | 595-DRV8811PWP | 6.16 | 24.64 | |
1 | FT232RL | FT232RL | IC2 | FTDI FT232RL-REEL | 895-FT232RL | 4.05 | 4.05 | |
1 | L5970D | L5970D | IC4 | STMicroelectronics L5970D | 511-L5970D | 2.33 | 2.33 | |
1 | Debug | LEDCHIP-LED0805 | LED1 | Lite-On LTST-S220GKT | 859-LTST-S220GKT | 0.12 | 0.12 | |
1 | HEAT | LEDCHIP-LED0805 | LED3 | Lite-On LTST-S220GKT | 859-LTST-S220GKT | 0.12 | 0.12 | |
1 | Power | LEDCHIP-LED0805 | LED2 | Lite-On LTST-S220GKT | 859-LTST-S220GKT | 0.12 | 0.12 | |
1 | ICSP | MA03-2 | CON5 | FCI 67996-106HLF | 649-67996-106HLF | 609-3202-ND | 0.24 | 0.24 |
1 | IRF8714PBF | MOSFET_N_SO8 | T1 | International Rectifier IRF8714TRPBF | IRF8714TRPBFCT-ND | 0.96 | 0.96 | |
6 | 1k | R-EU_R0603 | R1, R3, R7, R15, R17, R24 | Bourns CR0603-FX-1001ELF | 652-CR0603FX-1001ELF | 0.05 | 0.3 | |
2 | 1k8 | R-EU_R0603 | R14, R16 | Panasonic ERJ-3EKF1801V | 667-ERJ-3EKF1801V | 0.04 | 0.08 | |
1 | 3k6 | R-EU_R0603 | R13 | Panasonic ERJ-3EKF3601V | 667-ERJ-3EKF3601V | 0.04 | 0.04 | |
4 | 3k9 | R-EU_R0603 | R19, R20, R21, R22 | Panasonic ERJ-3EKF3901V | 667-ERJ-3EKF3901V | 0.04 | 0.16 | |
5 | 4k7 | R-EU_R0603 | R6, R10, R11, R25, R35 | Panasonic ERJ-3EKF4701V | 667-ERJ-3EKF4701V | 0.04 | 0.2 | |
2 | 10k | R-EU_R0603 | R2, R9 | Panasonic ERJ-3EKF1002V | 67-ERJ-3EKF1002V | 0.04 | 0.08 | |
1 | 11k | R-EU_R0603 | R12 | Panasonic ERJ-3EKF1102V | 667-ERJ-3EKF1102V | 0.04 | 0.04 | |
1 | 100k | R-EU_R0603 | R26 | Panasonic ERJ-3EKF1003V | 667-ERJ-3EKF1003V | 0.04 | 0.04 | |
4 | 180r | R-EU_R0603 | R4, R5, R8, R18 | Panasonic ERJ-3EKF1800V | 667-ERJ-3EKF1800V | 0.04 | 0.16 | |
8 | 220k | R-EU_R0603 | R36, R37, R38, R39, R40, R41, R42, R43 | Panasonic ERJ-3EKF2203V | 667-ERJ-3EKF2203V | 0.04 | 0.32 | |
1 | 270r | R-EU_R0603 | R23 | Bourns CR0603-FX-2700GLF | 652-CR0603-FX2700GLF | 0.04 | 0.04 | |
8 | 0r22 | R-EU_R1210 | R31, R32, R33, R34, R44, R45, R46, R47 | Vishay RCWE1210R220FKEA | 71-RCWE1210R220FKEA | 1.82 | 14.56 | |
1 | SN75176AD | SN75176AD | IC1 | Texas Instruments SN75176ADR | 595-SN75176ADR | 0.80 | 0.80 | |
1 | POWER | WEIDMULLERSL2 | CON14 | Molex 39502-1002 | 538-39502-1002 | 0.50 | 0.50 | |
1 | 744066221 | WE-TPC_XL/XLH | L1 | Wurth 744066221 | 732-1084-1-ND | 2.88 | 2.88 | |
Total | 88.25 |
Electronics/Non-PCB Components (Sensor, Motor, and Power Connectors)
Qty | Value | Device | Parts | Manufacturer Part No. | Mouser | DigiKey | Price ea | Total |
---|---|---|---|---|---|---|---|---|
1 | Mating Connector for 12V-24V Power Supply | Molex 39500-0002 | 538-39500-0002 | 1.37 | 1.37 | |||
2 | 4-Pin, Male headers for Motors/Heater/I2C | Molex 22-01-3047 | 538-22-01-3047 | 0.35 | 2.1 | |||
3 | 5-Pin, Male Headers for End-Stop Sensors | Molex 22-01-3057 | 538-22-01-3057 | 0.36 | 1.08 | |||
11 | Gold-Plated Molex Pins for headers | Molex 08-55-0101 | 538-08-55-0101 | 0.11 | 4.29 | |||
3 | X/Y/Z-Axis Opto Sensors (or use microswitches) | Vishay Semiconductors TCST2103 | 782-TCST2103 | 1.26 | 3.78 | |||
Total | 12.62 |
Purchased
- Generation 6 Board - $15
- ebay link
- Gen6_Files.zip
- Pic of blank board
- Pic of completed board
Software
- Bootloader
- Firmware
- https://github.com/kliment/Sprinter
- http://www.mendel-parts.com/downloads/firmware/_MENDEL/GEN6/
- sprinter + printrun + SFACT
- printrun is the host software, and SFACT is a modified slicer just for repraps