Difference between revisions of "Laser cutter"
From Makers Local 256
Enabrintain (Talk | contribs) (→Our Current Laser Cutter: added reference to the new laser) |
Enabrintain (Talk | contribs) (→SrsBizness Laser Cutting: took off part saying that we arent there yet, cause we been there since 2013) |
||
| Line 26: | Line 26: | ||
==SrsBizness Laser Cutting== | ==SrsBizness Laser Cutting== | ||
| − | * | + | * referece |
| − | + | ||
| − | + | ||
* [http://www.buildlog.net/cnc_laser/mach_laser_power.html Methods to control the beam power of a laser tube] | * [http://www.buildlog.net/cnc_laser/mach_laser_power.html Methods to control the beam power of a laser tube] | ||
Revision as of 13:37, 24 May 2018
|
Creator: |
Contents
[hide]Our Current Laser Cutter
for the old laser page search for "FLC1490 Laser Cutter"
Overview
This page is a Research page for hanging data on Laser Cutting.
Laser Diode Cutting
I like the idea of playing with laser diodes on the 2x4 CNC Machine. Applications that spring to mind are: PCB Stencils(for Solder Paste Stenciling), and Other stencils.
- The guy at Buildlog is my hero.(Mach3 Laser Cutter Setup)
- This page shows how to convert gCode to a signal on pin one of the parallel port.
- I will need to divert pin 1 or possibly look for where it goes on the motor driver board.
- PCB Stencil Materials
- This page seems to be exhaustive regarding the construction of low amperage diode laser drivers.
