Difference between revisions of "Serial IP Control"
From Makers Local 256
(initial revision and description) |
m (fixed) |
||
| Line 1: | Line 1: | ||
| + | == Status == | ||
| + | <onlyinclude>{{{status|Planning}}}</onlyinclude> | ||
| + | |||
| + | |||
| + | == Details == | ||
This will be controlled by some random little microprocessor and will have a 7 segment displays and 4 position dial to move between octets. There will also be a 16 position dial that allows setting of the current octet. There will be one toggle switch for telling the device to send the current octet to the computer and another to switch between dhcp and manual settings. | This will be controlled by some random little microprocessor and will have a 7 segment displays and 4 position dial to move between octets. There will also be a 16 position dial that allows setting of the current octet. There will be one toggle switch for telling the device to send the current octet to the computer and another to switch between dhcp and manual settings. | ||
Revision as of 07:49, 24 May 2007
Status
Planning
Details
This will be controlled by some random little microprocessor and will have a 7 segment displays and 4 position dial to move between octets. There will also be a 16 position dial that allows setting of the current octet. There will be one toggle switch for telling the device to send the current octet to the computer and another to switch between dhcp and manual settings.
