Difference between revisions of "Desktop Jacob's Ladder"
From Makers Local 256
m |
(Materials added) |
||
| Line 1: | Line 1: | ||
== Status == | == Status == | ||
| − | Circuit Assembly | + | Materials Acquired, PCB Made (might have to make another), working on Circuit Assembly |
== Justification == | == Justification == | ||
| Line 6: | Line 6: | ||
== Materials List== | == Materials List== | ||
| − | * | + | === Resistors === |
| + | *(7) 1K resistors | ||
| + | *(1) 100K Pot with shaft | ||
| + | *(1) 100K Trim Pot | ||
| − | + | === Caps === | |
| + | *(1) 4.7 uF electrolytic | ||
| + | *(1) 0.001 uF ceramic | ||
| + | |||
| + | === Chips === | ||
| + | *(1) 2N3904 NPN Trans. | ||
| + | *(1) IRF530 N-channel MOSFET | ||
| + | *(1) 556 Dual Timer IC | ||
| + | *(1) Indicator Led | ||
| + | |||
| + | === Misc === | ||
| + | *(1) IC Socket for 556 chip | ||
| + | *(1) PCB (homemade) | ||
| + | *(1) Car ignition coil, preferably an old-type coil that looks like a tall cylinder | ||
| + | *(1) SPST switch | ||
| + | *(1) 12 Volt Battery Pack (8-AA pack) | ||
| + | *(1) Metal Coat Hangar | ||
| + | *(1) Project Case | ||
| + | |||
| + | *Hookup wire (18Ga, insulated) | ||
| + | *Hot Glue | ||
Revision as of 22:41, 28 August 2007
Status
Materials Acquired, PCB Made (might have to make another), working on Circuit Assembly
Justification
Come on, a desktop Jacob's Ladder run off AA batteries? Too Fucking Cool.
Materials List
Resistors
- (7) 1K resistors
- (1) 100K Pot with shaft
- (1) 100K Trim Pot
Caps
- (1) 4.7 uF electrolytic
- (1) 0.001 uF ceramic
Chips
- (1) 2N3904 NPN Trans.
- (1) IRF530 N-channel MOSFET
- (1) 556 Dual Timer IC
- (1) Indicator Led
Misc
- (1) IC Socket for 556 chip
- (1) PCB (homemade)
- (1) Car ignition coil, preferably an old-type coil that looks like a tall cylinder
- (1) SPST switch
- (1) 12 Volt Battery Pack (8-AA pack)
- (1) Metal Coat Hangar
- (1) Project Case
- Hookup wire (18Ga, insulated)
- Hot Glue
