Difference between revisions of "2x4 CNC Machine"
From Makers Local 256
Enabrintain (Talk | contribs) (→Progress) |
Enabrintain (Talk | contribs) (→Progress) |
||
| Line 12: | Line 12: | ||
==Progress== | ==Progress== | ||
| − | * Most of the Parts are ordered. The wood has been cut, but not fitted. | + | * Most of the Parts are ordered. |
| + | * The wood has been cut, but not fitted. | ||
| + | * Sourced Barrel Nuts locally | ||
| + | * Electronics and Steppers are in | ||
| + | * Need to get stepper/drive screw connectors | ||
== Parts List == | == Parts List == | ||
Revision as of 20:56, 27 October 2010
|
Creator: |
Overview
A medium sized CNC Machine capable of cutting patterns
The Plan
- This project's focus is on implementing basic (though scalable) CNC functionality.
Progress
- Most of the Parts are ordered.
- The wood has been cut, but not fitted.
- Sourced Barrel Nuts locally
- Electronics and Steppers are in
- Need to get stepper/drive screw connectors
Parts List
| Part | Number | Price |
|---|---|---|
| 2'x 4'x 3/4" MDF | 4 | $45 |
| 608ZZ Bearings (BRA) | 24 | $18 |
| R8zz Bearings | 6 | $13 |
| Aluminium Angle Bracket (1" x 1/8" x 36") | 1 | ? |
| NEMA 23 Steppers | 3 | |
| 240W DC Power Supply | 1 | |
| CNC Controller Kit (china) | 1 | $160 |
| Sub Total | ~$236 |
Next Steps
- Lewters sells Barrel Nuts, so if the ones I ordered don't arrive soon - get some from there. (consolation: I didn't order enough anyway) (DONE - 26OCT10)
- Put the Table together.
- X-axis
- 2'x 4' MDF sections bolted together (DONE 27OCT10)
- Rails attached (Rails Cut)
- Ends attached (holes drilled in 2x4s but not in Ends)
- Y-axis
- Z-axis
- X-axis
- Get miscellaneous parts (screw connectors)
- Wait for the Control Equipment to arrive from China. (ARRIVED- 27OCT10)
Resources
Ideas
- I'll probably want to go with a belt drive system for the 4'x 8' iteration.
