Difference between revisions of "Inkjet PCB Etching"
Enabrintain (Talk | contribs) m (/ Update: added Pictures, Links, and further overview /) |
Enabrintain (Talk | contribs) m (→Links: added comments) |
||
| Line 10: | Line 10: | ||
==Links== | ==Links== | ||
| − | * [http://tech.groups.yahoo.com/group/Inkjet_PCB_Construction/ Yahoo Group] | + | * [http://tech.groups.yahoo.com/group/Inkjet_PCB_Construction/ Yahoo Group] These guys rock. |
| − | * [http://www.fullspectrumengineering.com/tutorial.html Full Spectrum Engineering Tutorial page] These guys rock. | + | * [http://www.fullspectrumengineering.com/tutorial.html Full Spectrum Engineering Tutorial page] These guys also rock. (plus the sell awesome lasers!) |
** (on step 6 - the images are wrong - but you can browse to them; they should be "tutorial9.gif" and "tutorial10.gif", respectively) | ** (on step 6 - the images are wrong - but you can browse to them; they should be "tutorial9.gif" and "tutorial10.gif", respectively) | ||
| − | * [http://techref.massmind.org/techref/pcb/etch/directinkjetresist.htm Direct to PCB InkJet Resist Printing page] | + | * [http://techref.massmind.org/techref/pcb/etch/directinkjetresist.htm Direct to PCB InkJet Resist Printing page] A thorough project page. |
| − | + | ||
==Pretty Pictures== | ==Pretty Pictures== | ||
Revision as of 15:09, 28 February 2012
|
Creator: |
Overview
So apparently I am no good at the Laser Toner transfer method for PCB Etch resist. I seem to have issues getting things to line up on multiple applications (read: ironings). Using an Inkjet Printer to apply an etch resist layer to copper clad pcb is by no means a new idea. A bunch of people have gone before, making this project a relatively pain free one. About the only pain I experienced on this project was the Epson Artisan 50 that I bought new/unopened off ebay was a bit finicky starting up. I had to pop the ink cartridges out and re-seat them before it detected them and initialized them. See the Links section for my sources.
Links
- Yahoo Group These guys rock.
- Full Spectrum Engineering Tutorial page These guys also rock. (plus the sell awesome lasers!)
- (on step 6 - the images are wrong - but you can browse to them; they should be "tutorial9.gif" and "tutorial10.gif", respectively)
- Direct to PCB InkJet Resist Printing page A thorough project page.
Pretty Pictures
 |
 |
 |
 |
 |
