Difference between revisions of "Makers mantis cnc"
From Makers Local 256
m (→added documentation) |
m (→makers mantis) |
||
| Line 1: | Line 1: | ||
=makers mantis= | =makers mantis= | ||
Project goal is for us to produce a mantis 9 cnc mill. | Project goal is for us to produce a mantis 9 cnc mill. | ||
| + | [[Image:makers_mantis_1.jpg|thumb|3d render of frame.]] | ||
| + | |||
=Parts needed= | =Parts needed= | ||
*3 3/16" ID 1/32" Nylon/silicone tubing coupler | *3 3/16" ID 1/32" Nylon/silicone tubing coupler | ||
Revision as of 15:10, 9 September 2010
makers mantis
Project goal is for us to produce a mantis 9 cnc mill.
Parts needed
- 3 3/16" ID 1/32" Nylon/silicone tubing coupler
- 9 3/8-12 Delrin AF nuts
- 3 .125" dowling
- cut boards (brokentrace handling)
