Difference between revisions of "Makers mantis cnc"
From Makers Local 256
m (interesting) |
m |
||
| Line 7: | Line 7: | ||
=Parts needed= | =Parts needed= | ||
*3 3/16" ID 1/32" Nylon/silicone tubing coupler | *3 3/16" ID 1/32" Nylon/silicone tubing coupler | ||
| − | *9 3/8-12 Delrin AF nuts (looks like we are making this part by hand) | + | *9 3/8-12 Delrin AF nuts (looks like we are making this part by hand from tube from preaux) |
*3 .125" dowling | *3 .125" dowling | ||
*cut boards (brokentrace handling) | *cut boards (brokentrace handling) | ||
| Line 14: | Line 14: | ||
*mrworld $30 | *mrworld $30 | ||
*brokentrace boards and getting it cut | *brokentrace boards and getting it cut | ||
| + | *preaxphoto for providing nuts... | ||
=added documentation= | =added documentation= | ||
Revision as of 10:25, 10 September 2010
makers mantis
Project goal is for us to produce a mantis 9 cnc mill. Total cost so far is $240
Parts needed
- 3 3/16" ID 1/32" Nylon/silicone tubing coupler
- 9 3/8-12 Delrin AF nuts (looks like we are making this part by hand from tube from preaux)
- 3 .125" dowling
- cut boards (brokentrace handling)
Donations
- mrworld $30
- brokentrace boards and getting it cut
- preaxphoto for providing nuts...
