Difference between revisions of "Makers mantis cnc"
From Makers Local 256
m |
m (more pictures) |
||
| Line 4: | Line 4: | ||
[[Image:makers_mantis_1.jpg|thumb|3d render of frame.]] | [[Image:makers_mantis_1.jpg|thumb|3d render of frame.]] | ||
[[Image:makers_mantis_2.jpg|thumb|3d render of frame.]] | [[Image:makers_mantis_2.jpg|thumb|3d render of frame.]] | ||
| + | [[Image:makers_mantis_3.jpg|thumb|3d render of frame.]] | ||
| + | [[Image:makers_mantis_4.jpg|thumb|3d render of frame.]] | ||
| + | [[Image:makers_mantis_5.jpg|thumb|3d render of frame.]] | ||
=Parts needed= | =Parts needed= | ||
Revision as of 14:33, 10 September 2010
makers mantis
Project goal is for us to produce a mantis 9 cnc mill. Total cost so far is $240
Parts needed
- 3 3/16" ID 1/32" Nylon/silicone tubing coupler
- 9 3/8-12 Delrin AF nuts (looks like we are making this part by hand from tube from preaux)
- 3 .125" dowling
- cut boards (brokentrace handling)
Donations
- mrworld $30
- brokentrace boards and getting it cut
- preaxphoto for providing nuts...
