Difference between revisions of "Makers mantis cnc"
From Makers Local 256
m (added more images) |
Brokentrace (Talk | contribs) (Added additional notes to donations.) |
||
| Line 18: | Line 18: | ||
=Donations= | =Donations= | ||
*mrworld $30 | *mrworld $30 | ||
| − | * | + | *BrokenTrace: boards,getting it cut, 3D CAD files and DXF Files |
*preaxphoto for providing nuts... | *preaxphoto for providing nuts... | ||
=added documentation= | =added documentation= | ||
*[http://makeyourbot.org/mantis9.1 mantis home] | *[http://makeyourbot.org/mantis9.1 mantis home] | ||
| − | *[http://makeyourbot.org/local--files/mantis9-1/mantis9.1.dxf | + | *[http://makeyourbot.org/local--files/mantis9-1/mantis9.1.dxf original mantis dxf] |
*[http://makeyourbot.org/local--files/mantis9-1/bom-9.xls original mantis bom] | *[http://makeyourbot.org/local--files/mantis9-1/bom-9.xls original mantis bom] | ||
*[https://256.makerslocal.org/wiki/index.php/File:Mantis_Fab_Prints.pdf fab prints] | *[https://256.makerslocal.org/wiki/index.php/File:Mantis_Fab_Prints.pdf fab prints] | ||
*[https://256.makerslocal.org/wiki/index.php/File:Mantis_Layout.pdf redone dxf pdf] | *[https://256.makerslocal.org/wiki/index.php/File:Mantis_Layout.pdf redone dxf pdf] | ||
Revision as of 15:53, 10 September 2010
makers mantis
Project goal is for us to produce a mantis 9 cnc mill. Total cost so far is $240
Parts needed
- 3 3/16" ID 1/32" Nylon/silicone tubing coupler
- 9 3/8-12 Delrin AF nuts (looks like we are making this part by hand from tube from preaux)
- 3 .125" dowling
- cut boards (brokentrace handling)
Donations
- mrworld $30
- BrokenTrace: boards,getting it cut, 3D CAD files and DXF Files
- preaxphoto for providing nuts...
