Difference between revisions of "Eat-n-Educate"

From Makers Local 256
Jump to: navigation, search
m (Yet to be scheduled: colon again)
m (moving stuff around)
Line 17: Line 17:
  
 
== Sessions ==
 
== Sessions ==
=== RTL-SDR with Mog ===
 
Mog is going to learn us some Software Defined Radios using DVB-T dongles!
 
* Recommended Hardware - http://smile.amazon.com/dp/B00SXZDUAQ
 
* Recommended Software -
 
 
 
=== Intro to Python with Shapr ===
 
=== Intro to Python with Shapr ===
 
Shapr is going to learn us some Python!
 
Shapr is going to learn us some Python!
Line 27: Line 22:
 
* Recommended Software - Linux environment (Raspberry Pi, Native Linux install, VM on Windows)
 
* Recommended Software - Linux environment (Raspberry Pi, Native Linux install, VM on Windows)
 
* Recommended Hardware - Laptop with wifi, or Raspberry Pi with screen and keyboard and mouse.
 
* Recommended Hardware - Laptop with wifi, or Raspberry Pi with screen and keyboard and mouse.
 +
 +
=== RTL-SDR with Mog ===
 +
Mog is going to learn us some Software Defined Radios using DVB-T dongles!
 +
* Recommended Hardware - http://smile.amazon.com/dp/B00SXZDUAQ
 +
* Recommended Software -
  
 
=== Intro to OpenSCAD with Phil ===
 
=== Intro to OpenSCAD with Phil ===
 
Phil is going to learn us some OpenSCAD
 
Phil is going to learn us some OpenSCAD

Revision as of 14:15, 3 April 2015

What?

The same idea as a Lunch-n-Learn except at dinner time. These are ~1hr learning sessions about random topics. Bring a dinner, and an appetite for learning something random. Please look in the session description for any prerequisites that may be needed for interactive sessions.

Calendar

  • April 9, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Tasker(Android App) with Tyler
  • April 23, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Python with Shapr
  • May 7, 2015, 6:30pm - 7:30: Eat-n-Educate - Intro to OpenSCAD with Phil

Yet to be scheduled

  •  ?? , 2015, 6:30pm - 7:30pm: Eat-n-Educate - RTL-SDR with Mog
  •  ?? , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Haskell with Shapr

Requirements for Presenters

  • Content to fill an hour
  • Syllabus - preferably a week before
  • Any prerequisites defined in session section of wiki

Sessions

Intro to Python with Shapr

Shapr is going to learn us some Python!

  • Intended Audience - Some previous programming experience, a single college class is fine.
  • Recommended Software - Linux environment (Raspberry Pi, Native Linux install, VM on Windows)
  • Recommended Hardware - Laptop with wifi, or Raspberry Pi with screen and keyboard and mouse.

RTL-SDR with Mog

Mog is going to learn us some Software Defined Radios using DVB-T dongles!

Intro to OpenSCAD with Phil

Phil is going to learn us some OpenSCAD