Door Automation

From Makers Local 256
Revision as of 20:27, 9 January 2012 by Enabrintain (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Creator:
EnabrinTain
Status:
Design
Born On:
19:27, 9 January 2012 (CST)
Last Updated:
20:27, 09 January 2012 (CDT)

Overview

This is an opportunity for a couple of plans to come together. I want to reproduce the USB Door Auth currently in use at Makers Local 256. I'd like to design a nicer Arduino shield than the proto-board that we are using at the shop. I intend to use the Laser to etch the acid-resist mask for the pcb.

Retrieved from "https://256.makerslocal.org/wiki/index.php?title=Door_Automation&oldid=13610"