Eat-n-Educate
From Makers Local 256
What?
The same idea as a Lunch-n-Learn except at dinner time. These are ~1hr learning sessions about random topics. Bring a dinner, and an appetite for learning something random. Please look in the session description for any prerequisites that may be needed for interactive sessions.
Calendar
- August 13, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Learn you some buspirate with mog
- August 27, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Identifying Recasting and Mold making with Lowell
Yet to be scheduled
- ?? , 2015, 6:30pm - 7:30pm: Eat-n-Educate - 3D Printing Nonsense with ctag (can't make summer schedule)
- ?? , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Lighting Talk / Show & Tell with YOU!
- ?? , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Wiki Markdown with Benjamin
Upcoming Sessions
Learn you some buspirate with mog
Completed Sessions
Lighting Talk / Show & Tell with YOU!
- July 30 , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Lighting Talk / Show & Tell with YOU!
- Kirstin is talking about the trials and tribulations of being a lab tech
- Sam is talking about resistance to the Nazi party from within Germany
- Hunter is talking about the shop infrastructure
- David is talking about composites
- Tim is talking about his latest web-app/api project.
- Preaux will be talking about kitchen knife skills
Intro to Haskell with Shapr
- You will need to create an account on the FPComplete site https://www.fpcomplete.com/ as this introduction will be using their Web based IDE.
- July 16 , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Haskell with Shapr
Design a Printed Circuit Board (PCB) with KiCAD
- June 18 , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Design a Printed Circuit Board (PCB) with KiCAD
Intro to SketchUp with thematthewknot
- June 4 , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to SketchUp with thematthewknot
thematthewknot is going to go over basic use and tip for using sketchup for 3D modeling.
- Have SketchUp installed on your computer before hand.
- Bring a mouse as touch pads are difficult to use with this application.
RTL-SDR with Mog
Mog is going to learn us some Software Defined Radios using DVB-T dongles!
- May 21 , 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to RTL-SDR with Mog
- Recommended Hardware - http://smile.amazon.com/dp/B00SXZDUAQ
- Recommended Software - Gnuradio Companion and gqrx
Intro to Tasker(Android App) with Tyler
- April 9, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Tasker(Android App) with Tyler (link)
Intro to Python with Shapr
Shapr is going to learn us some Python!
- April 23, 2015, 6:30pm - 7:30pm: Eat-n-Educate - Intro to Python with Shapr
- Intended Audience - Some previous programming experience, a single college class is fine.
- Recommended Software - Linux environment (Raspberry Pi, Native Linux install, VM on Windows)
- Recommended Hardware - Laptop with wifi, or Raspberry Pi with screen and keyboard and mouse.
Intro to OpenSCAD with Phil
Phil is going to learn us some OpenSCAD
- May 7, 2015, 6:30pm - 7:30: Eat-n-Educate - Intro to OpenSCAD with Phil
- Please install OpenSCAD http://www.openscad.org/
