Robotec 100W Laser/RepairTimeline

From Makers Local 256
< Robotec 100W Laser
Revision as of 09:20, 15 December 2017 by Enabrintain (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Diagnosis

  • Laser cutting power was noticeably less, with reports of multiple passes being necessary to cut through material starting as early as 25NOV17.
  • On 12DEC17, a concerted effort to collect evidence of the low power phenomenon was pursued.
    • The problem was verified, and the laser's mirrors were examined for alignment issues.
    • No problems with the mirrors were identified, so it was decided to contact the manufacturer.
  • On 13DEC17, the manufacturer was emailed, they requested photos of various parts of the laser to determine proper installation.
  • The requested photos were provided.
  • On 14DEC17, the manufacturer determined that the problem is a defective laser tube and offered to replace it under warranty
    • This replacement is contingent on photos of the defective tube's destruction

Next Steps

  • The Laser Tube needs to be destroyed, preferable while being filmed. Photos of the destroyed tube must be mailed to the manufacturer.
  • Upon receipt of the evidence of the tube's destruction, the Manufacturer will ship us a new tube via DHL.
  • We can then install it and have a happy laser again.