Internet Enabled Cat Treat Dispenser

Creator: Omegix Status: Your Status Born On: 22:43, 20 April 2016 (CDT) Last Updated: 20:23, 16 May 2016 (CDT)

Overview

Internet Enabled Cat Treat Dispenser

Workflow:

1. Hopper filled with cat treats
2. ESP8266 Subscribes to an MQTT broker
3. ESP8266 Receives command to dispense treat
4. Hobby Servo Rotates the hopper so that a compartment is over a hole in the acrylic base plate
5. Gravity pushes the treats from the hopper compartment through the hole in the base plate
6. Cat contemplates existence and the futility of attachment, enjoys treats none the less.

Materials

• 3D printed Hopper
• Hobby Servo
• Stepper Motor
• Stepper Motor Control Board
• Power Supply
• ESP8266
  • Pinouts: https://github.com/esp8266/Arduino/issues/584#issuecomment-123715951
• Acrylic Base With Hole in it
  • DXF File

Pictures

Parts Pictures

CAD Pictures