Sand Table
From Makers Local 256
My Nephew needed a Sand Table
With some help at the shop I made him an awesome Sand Table. Here is how I did it.
What you need
- Inspiration - I have the most adorable nephew, he was turning 2.
- Plywood
- I used treated 1/2in
- 2/4's
- Kitchen sink stopper
- Casters (I used lawnmower wheels)
- Allthred for the axel
- Screws
- Bolts/washers
- Paint and Primer
- Caulk
- Friends (stop by ML256)
How to do it
- 1. Draw up your plans
- 2. Use your plans as guidelines and start cutting the wood
- 3. Put the pieces together in the logical order
- 4. Sand all the edges and sides
- 5. Caulk all the cracks
- 5. Cut a drainage hole
- 6. Prime
- 7. Paint