View source for Omegix/Personal Labeling System

In case I want to make my own vinyl labels instead of purchasing them from myassettag.com
MyAssetTag uses custom sizing on their free downloadable label pdf.
Could get around this by finding another barcode label generating software suite and using off the shelf vinyl stickers at a cheaper price.
Or... cut these on the vinyl cutter.  A real pain the ass, but better than dropping $53 on the cheapest vinyl sticker option available from myassettag.com


== Obtaining Printer File ==
Go to myassettag.com

Free Assset labels.

Select The Logo at Top, barcode at bottom (LB-3039L-B) (0.75" x 2")

Select Consecutive NUmber
Select Advanced

Makers Local Prefix is 256.
Omegix' Suffic for Makers Local tags is JPC or OME

There will be 4 digits between the prefix and the suffix.

Omegix's Print Log:
2018.02.07:  Tags 0001 Through 0050

== Obtaining Vinyl Sticker ==
* Order Flat 8.5 x 11 vinyl sticker sheet
* create design for 0.75" x 2"
* Feed sticker sheet into vinyl cutter


== Printing PDF == 
From Website:  Load your blank label or tag stationery into the paper tray, using the paper guide for precise configuration. 
Be sure that the top of the blank label or tag sheet is pressed flush against the printer feeding wheel or paper tray.

• Modifying your print settings is a simple process that is crucial for accurate alignment, yet often overlooked. 
When you click print, a print dialog box is displayed. Search for the "Page Scaling" area and select "None". Click "OK" to
print to apply these setting to the current print job.

== Pricing ==
MyAssetTag Pre-cut labels:  $53, pack of 50 sheets, 2500 labels.