View source for CRT Mountable Fan

==Overview==

A simple CRT mountable fan.

==Materials==

#Small DC computer fan
#9-12 volt DC power supply
#10-32 x 36 threaded rod
#1/16" thick 3/4" x 36" Aluminum angle bracket
#2 #6-32 x2" machine screws with nuts
#3 #6-32 x1/2" machine screws with nuts
#6 #10-32 nuts
#1 switch

==Construction procedure==


#Start by cutting a two pieces of the Aluminum bracket to the height of the fan as shown(fig 1). [[Image:Crtfan_brackets.jpg|right|200px|thumb|Brackets figure 1]]
#Now solder the fan to the switch and the power supply to the switch(fig 2. [[Image:Crtfan_switch.jpg|left|200px|thumb|Switch figure 2]]
#Then drill the holes so that the brackets can be mounted to the fan.
#Next mount the fan bracket assembly to the cut section of #10-32 rod.
#Now mount the final set of brackets to the ends of the threaded rod.
#Lastly mount the fan onto a CRT.

[[Image:Crtfan_finalassembly.jpg|center|100px|thumb|Final Assembly]]

==Detailed Drawings==
To be added later