View source for DIY Dyson fan

{{Project|Creator=Strages
|Status=<onlyinclude> Researching </onlyinclude>                                <!--LEAVE ONLYINCLUDES FOR STATUS HACK--> 
|Born On=10:55, 25 February 2010 (CST)                                                                  <!--DO NOT EDIT -->
|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT)              <!--DO NOT EDIT -->
}}

==Overview==
Through a discussion about homemade bagpipes on 02/24/2010 and the lack of lung capacity to fill the sack, it was suggested that a Dyson fan design might help with this.  This led to further usage possibilities and this project page.

==How it works==
* [http://www.youtube.com/watch?v=gChp0Cy33eY How the Dyson fan works]

==Ideas==
* Rather than a fan or air compressor in the base as the source, place the ring on a set of low friction rollers so it can be manually spun.
** For instance in the case of bagpipes a person would be the source of the moving air.
* Used as a wind "amplifier" through air scoops around the ring.
** One problem to overcome would be having it face into the wind without it's own air stream affecting it, as it'll be going perpendicular to the wind itself.

==Progress==





[[Category:Reverse Engineering]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->