View source for Facilities/Priority List

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

BoldItalic

External link (remember http:// prefix)Internal linkEmbedded fileReferenceSignature and timestamp

AdvancedSpecial charactersHelp

Level 2Level 3Level 4Level 5

Heading

FormatBulleted listNumbered listIndentationNo wiki formattingNew line

BigSmallSuperscriptSubscript

InsertPicture galleryTableRedirect

== Doing == == To Do == * ELECTRICAL ** Tools area breakers ** AV area wiring clusterfuck ** Outlets that need attention *** Kitchen switch and outlet *** Hallway bathroom *** Office bathroom *** Front door * PNEUMATIC ** Replace leaking hose above 2nd floor CNC Machine ** Get on-demand ventilation for 3-D printers * Set up consumables tracking. ** Item "Stock" for shop? ** Items that should always be available (soap, duct tape) are voted on by the membership, and then facilities committee works to keep them in stock. * UPGRAYEDS ** Install water heater timer ** Drywall (+ artwork) around upstairs banister ** Replace bikeshed ** opening office window. * FIRST AID ** [doing] Move main first aid kit out of bathroom. ** Provide floorplan of safety equipment ** Provide on-demand lectures for first aid. * Shop tours? Field trips? ** The shop -- as a nonprofit with the stated goal of spreading the maker spirit -- should be an amazing place for school field trips. Currently I actively avoid them, because there's no way to guarantee that the kids don't encounter a drunk member in the shop. Fixing the problem then censors members in the name of making the shop kid-friendly, which it isn't. ** I think a solution to this dilemma would be to schedule field trips, and then alert the shop that there will be a dry day when no alcohol consumption or obscenity will be tolerated. == Done == * [[Facilities/Priority_List/Textiles Migration | Textiles Migration]] * Renovate bathroom ** New linoleum floor ** CNC new sink cabinet ** Better fan? Connect fan to outside exhaust? * UNISTRUT ** Install Unistrut for Radio Mast Mount \ Camera Mount ** To be installed either on the corner of the building, or if that is not feasable, behind member storage. ** Ctag and Omegix to install on 2016.05.21 (Cleanup Day) * FABLAB ** Finish installing ceiling. ** Install shelving. ** [done] fablab AC *** Thanks Travis! * Organize lost and found ** Four shelves. Four weeks. *** Three weeks to collect item. *** fourth week anyone can take it. *** End of the fourth week item is tossed. ** All incoming/outgoing items are cataloged. === Bathroom Renovation === ==== Dimensions ==== Environment: * Bathroom floor ** 6' x 5' * Horizontal Trim ** 36 & 1/4" from floor Old Vanity: * Existing Vanity ** front: 24" x 30" * Footwell ** 4" x 4" New Vanity: * Plywood ** 5/16" thick * New Countertop ** 28" x 25" (w x d) ** 5" tall at rear panel ** 1&1/2" tall at front lip ** 3/4" thick at middle section * New Vanity Frame ** (36.25 - 5) = 31.25" tall ** 27.5" wide ** 23.5" deep * Footwell ** 4" x 4" ==== Supplies ==== * [HAVE - Norm] Countertop * Floor Tiles ($0.69 per ft^2) * Adhesive ($13.47 per gallon) * Rubber Trim ($69.97) ** 4" tall, 120' long * Glue for Trim ($4.97) ** Probably need two * Sealer ($15.87 per gallon) * High Efficiency Toilet ($100) * Wall Paint ($???) * Drywall ($12) Estimated Total Cost: $243 [[Category:Facilities]]

Return to Facilities/Priority List.