View source for Omegix/Home Automation/Arrival Sensor

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

BoldItalic

External link (remember http:// prefix)Internal linkEmbedded fileReferenceSignature and timestamp

AdvancedSpecial charactersHelp

Level 2Level 3Level 4Level 5

Heading

FormatBulleted listNumbered listIndentationNo wiki formattingNew line

BigSmallSuperscriptSubscript

InsertPicture galleryTableRedirect

= Approaches = * Using Smart Phone As a position reporter * Use Mesh IoT network to detect addition of specific node (No GPS Solution) * Use GPS device that reports position via a 3G cellular network ** Only On when car is on via ODBII or lighter jack *** Components **** Voltage Regulator **** GPS **** Cellular Interface **** Memory (to store Geofence Locations) **** Processor (to calculate distance from Geofence) *** Pseudo Code **** On a Timer ****# When inside of geofence, record time stamp, call function to send message on cellular network ****# When powered off, IsReportMade flag should be reset. ****# If time outside geofence is greater than time inside geofence, set IsReportMade flag to false. **** Functions ***** ReportPosition() *****# If IsReportMade flag is false, send message on cellular network, set IsReportMade flag to true. *****# If IsReportMade flag is true, do not send message = Online Resources = * Tasker \ Autolocation * Kirk's Suggestions ** https://github.com/openhab/openhab/wiki/Mqttitude-Binding ** OpenPaths

Return to Omegix/Home Automation/Arrival Sensor.