Difference between revisions of "Shop Checklist"

From Makers Local 256
Jump to: navigation, search
m (added door lock advisory)
m (added doors)
Line 6: Line 6:
 
# Unplug or turn off all unnecessary equipment (LEAVE THE SERVERS AND CAMS ALONE).
 
# Unplug or turn off all unnecessary equipment (LEAVE THE SERVERS AND CAMS ALONE).
 
# Turn off A/C units and drop heater thermostat to 60 degF.
 
# Turn off A/C units and drop heater thermostat to 60 degF.
 +
# Close bathroom and kitchen doors.
 
# Close fridge and freezer doors.
 
# Close fridge and freezer doors.
 
# Turn off all inside lights (5 switches, two for main room, one for garage area, one for equipment room, one for kitchen).  Turn off Kitchen Loft and Library lights.
 
# Turn off all inside lights (5 switches, two for main room, one for garage area, one for equipment room, one for kitchen).  Turn off Kitchen Loft and Library lights.

Revision as of 00:52, 7 March 2011

Checklist for leaving the shop. This should be posted in a prominent place when leaving the shop.

  1. Shut and lock overhead door.
  2. Lower tarps on garage area.
  3. Replace equipment room door plugs.
  4. Replace window blocks (3, 2 in main room and 1 in kitchen).
  5. Unplug or turn off all unnecessary equipment (LEAVE THE SERVERS AND CAMS ALONE).
  6. Turn off A/C units and drop heater thermostat to 60 degF.
  7. Close bathroom and kitchen doors.
  8. Close fridge and freezer doors.
  9. Turn off all inside lights (5 switches, two for main room, one for garage area, one for equipment room, one for kitchen). Turn off Kitchen Loft and Library lights.
  10. Turn off all exterior lights (1 switch).
  11. Lock front door; wait 10 seconds for auto-lock to engage. If not, try pressing the lock button in the middle of the code number buttons. Also, ensure door is shut so bolt is aligned with eye.