Difference between revisions of "Open Manufacturing talk"
From Makers Local 256
Enabrintain (Talk | contribs) m (minor formatting) |
Enabrintain (Talk | contribs) m (→2x4 CNC Machine: minor correction) |
||
| Line 31: | Line 31: | ||
# Find DXF ([http://www.thingiverse.com/ Thingiverse], or elsewhere ([http://www.cnczone.com/ cnc zone] is a good place) | # Find DXF ([http://www.thingiverse.com/ Thingiverse], or elsewhere ([http://www.cnczone.com/ cnc zone] is a good place) | ||
| − | # Open | + | # Open DXF in LazyCam |
# Select Layer to cut | # Select Layer to cut | ||
# Generate Offset layer | # Generate Offset layer | ||
| Line 41: | Line 41: | ||
# Center mill | # Center mill | ||
# Start Cutting | # Start Cutting | ||
| − | |||
==[[Reprap/Mendel]]== | ==[[Reprap/Mendel]]== | ||
Revision as of 18:44, 8 August 2011
|
Creator: |
Overview
This is the class/talk Notes page for Phil's How to use the Shop's Various CNC tools Class.
MakerBot (cupcake)
- Find design on Thingiverse
- Open in Replicator G
- Zero Extruder, raise 10mm
- Pre-Heat Extruder and Heated bed
- Generate G-Code
- Edit G-Code (remove pre-heating section, find/replace the extrusion pauses (M103) )
- Print!
Links
2x4 CNC Machine
- Find DXF (Thingiverse, or elsewhere (cnc zone is a good place)
- Open DXF in LazyCam
- Select Layer to cut
- Generate Offset layer
- Assign Toolhead to layers
- Assign material thickness
- Generate G-Code
- Open G-Code in Mach3-Mill
- MAKE SURE SCALES ARE LOADED
- Center mill
- Start Cutting
Reprap/Mendel
- Nothing here yet!
