Difference between revisions of "Open Manufacturing talk"

Latest revision as of 14:48, 24 August 2011

Creator:
EnabrinTain
Status:
Note Taking
Born On:
18:12, 8 August 2011 (CDT)
Last Updated:
14:48, 24 August 2011 (CDT)

This is the class/talk Notes page for Phil's How to use the Shop's Various CNC tools Class.

Find design(STL) on Thingiverse
Open in Replicator G
Zero Extruder, raise 10mm
Pre-Heat Extruder and Heated bed
Generate G-Code
Edit G-Code (remove pre-heating section, find/replace the extrusion pauses (M103) )
Print!

Links

Thingiverse

@@ Line 9: / Line 9: @@
+==MakerBot (cupcake)==
+# Find design(STL) on [http://www.thingiverse.com/ Thingiverse]
+# Open in [http://replicat.org/ Replicator G]
+# Zero Extruder, raise 10mm
+# Pre-Heat Extruder and Heated bed
+# Generate G-Code
+# Edit G-Code (remove pre-heating section, find/replace the extrusion pauses (M103) )
+# Print!
-[[Category:Open Manufacturing]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->
+'''Links'''
+----
+[http://www.thingiverse.com/ Thingiverse]
+[http://replicat.org/ Replicator G]
+[http://wiki.bitsfrombytes.com/index.php/Skeinforge#Settings Skeinforge Settings]
+==[[2x4 CNC Machine]]==
+# Find DXF ([http://www.thingiverse.com/ Thingiverse], or elsewhere ([http://www.cnczone.com/ cnc zone] is a good place)
+# Open DXF in LazyCam
+# Select Layer to cut
+# Generate Offset layer
+# Assign Toolhead to layers
+# Assign material thickness
+# Generate G-Code
+# Open G-Code in Mach3-Mill
+# MAKE SURE SCALES ARE LOADED
+# Center mill
+# Start Cutting
+==[[Reprap/Mendel]]==
+* Nothing here yet!
+==Related Information==
+*[[Reprap/Mendel]]
+*[[Classes]]
+*[[Huntsville Open Manufacturing meetup]]
+[[Category:Open manufacturing]]
+[[Category:Classes]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->