Difference between revisions of "Card Organizer"

From Makers Local 256
Jump to: navigation, search
(Wood Prototype: added dimensions of box)
m (Wood Prototype: added thickness in inches)
Line 24: Line 24:
 
=== Resources ===
 
=== Resources ===
 
====Wood Prototype====
 
====Wood Prototype====
* Thickness:  5mm
+
* Thickness:  5mm (0.1969 inches)
 
* Using a 0.5" notch size, 14" x 9"  (max dimension of maker's laser cutter)
 
* Using a 0.5" notch size, 14" x 9"  (max dimension of maker's laser cutter)
  

Revision as of 20:12, 16 January 2012

Creator:
Omegix
Status:
Brainstorming Version 2
Born On:
16:26, 4 January 2012 (CST)
Last Updated:
20:12, 16 January 2012 (CDT)

Overview

Card organizer for collectible cards. Using Dominion as the contents.

Existing OTS Organizers

  • Molded Plastic "Jammers"
    • #5303 Disadvantage: Cards lay flat, no ability to insert dividers
    • #5305 Disadvantage: Small, will only hold one Set per box

Version 1

Version 1 was made from a Harbor Freight tool box, foam board, card stock, and a pdf file of the types of cards.

Version 2: Laser Cut Acrylic

Specs

  • Card Sizes: The set will be designed with Dominion priority in mind, but would like it to hold other card games if the difference is minimal. MtG cards are larger than Dominion cards, so going to make sure the card wells will hold them.
    • MtG: 92x66
    • Dominion: 91x59mm

Resources

Wood Prototype

  • Thickness: 5mm (0.1969 inches)
  • Using a 0.5" notch size, 14" x 9" (max dimension of maker's laser cutter)

everything else

Notes from Enabrintain

  • <EnabrinTain> well for a dominion organizer: http://boxmaker.rahulbotics.com/
  • <EnabrinTain> and then extract the design from the pdf using corel draw (its on the laser control computer) and modify in inkscape