Difference between revisions of "Snow machine"
From Makers Local 256
(initial commit) |
m (→BoM: Added total cost) |
||
| Line 22: | Line 22: | ||
* ½”female to Garden - QTY 1 | * ½”female to Garden - QTY 1 | ||
* Quick connect air fitting - QTY 1 | * Quick connect air fitting - QTY 1 | ||
| + | |||
| + | '''Total Cost:''' $34.33 | ||
===Assembly=== | ===Assembly=== | ||
Revision as of 22:42, 23 November 2012
|
Creator: |
Contents
[hide]Overview
A specialized nozzle for a water hose that injects air creating a fine mist that under the right conditions makes snow!
SG T-Type
This design comes from [www.snowathome.com/free_plans/SAH-SG_t-type_internal_mix.php snowathome.com] and is the simplest one they have a design for.
BoM
- ¼” cap - QTY 1
- 6” x nipple - QTY 1
- ¼” x Tee - QTY 1
- ¼” x 90 DEG street elbow - QTY 1
- ¼” close nipple - QTY 1
- ¼” mini ball valve - QTY 1
- 2” x nipple - QTY 1
- ¼”female x ½”male bushing - QTY 1
- ½”female to Garden - QTY 1
- Quick connect air fitting - QTY 1
Total Cost: $34.33
Assembly
- Use teflon tape on all connections.
- Use a 7/64" drill bit to put a hole in the cap.
- We had to use a 5/32" bit due to a lack of the one called for. We can always bore it out further if needed.
Pics
assembled nozzle
5/32" hole in the end
water and air hookups
