Difference between revisions of "User:Ctag/GrassHacker"

Revision as of 14:13, 22 January 2014 (view source) Ctag (Talk | contribs) m (added project) ← Older edit		Revision as of 11:32, 2 February 2014 (view source) Ctag (Talk | contribs) m (added dimensions) Newer edit →
Line 19:		Line 19:
	===Gear===		===Gear===
		+
		+	Original gear dimensions:
		+	Diameter - 4.19cm
		+	Height - 3.26cm
		+	Ratio (Diam / Height) - 1.29
		+
		+	Required Drive Shaft Diameter - 0.80cm
		+
		+	Printed gear dimensions (at 800% scale):
		+	Diameter - 3cm
		+	Height - 2.62cm
		+	Drive shaft diam - 0.5cm
		+	Ratio (Diam / Height) - 1.15

---

Revision as of 11:32, 2 February 2014

Creator: ctag Status: Scheming Born On: 13:13, 22 January 2014 (CST) Last Updated: 11:32, 02 February 2014 (CDT)

Grass Hacking

Heh, like this page will ever be updated...

Project Introduction

I'm going to build a lawnmower.

Materials

Gear

Original gear dimensions: Diameter - 4.19cm Height - 3.26cm Ratio (Diam / Height) - 1.29

Required Drive Shaft Diameter - 0.80cm

Printed gear dimensions (at 800% scale): Diameter - 3cm Height - 2.62cm Drive shaft diam - 0.5cm Ratio (Diam / Height) - 1.15