Difference between revisions of "User:Ctag/GrassHacker"

Revision as of 14:12, 22 January 2014 (view source) Ctag (Talk | contribs) m (revised introduction) ← Older edit		Latest revision as of 11:33, 2 February 2014 (view source) Ctag (Talk | contribs) m (I hate wiki formatting)
(2 intermediate revisions by one user not shown)
Line 1:		Line 1:
−	=Grass Hacking=	+	{{Project|Creator=ctag
		+	|Status=<onlyinclude> Scheming </onlyinclude>                                <!--LEAVE ONLYINCLUDES FOR STATUS HACK-->
		+	|Born On=13:13, 22 January 2014 (CST)                                                                  <!--DO NOT EDIT -->
		+	|Last Updated={{#time: H:i, d F Y| {{REVISIONTIMESTAMP}} }} (CDT)              <!--DO NOT EDIT -->
		+	}}
		+
		+
		+	[[Category:Put Category Here]]                                                  <!--MAKE AS MANY CATEGORIES AS YOU NEED-->
		+
		+	==Grass Hacking==
	Heh, like this page will ever be updated...		Heh, like this page will ever be updated...
Line 10:		Line 19:
	===Gear===		===Gear===
		+
		+	Original gear dimensions:
		+	* Diameter - 4.19cm
		+	* Height - 3.26cm
		+	* Ratio (Diam / Height) - 1.29
		+
		+	Required Drive Shaft Diameter - 0.80cm
		+
		+	Printed gear dimensions (at 800% scale):
		+	* Diameter - 3cm
		+	* Height - 2.62cm
		+	* Drive shaft diam - 0.5cm
		+	* Ratio (Diam / Height) - 1.15

---

Latest revision as of 11:33, 2 February 2014

Creator: ctag Status: Scheming Born On: 13:13, 22 January 2014 (CST) Last Updated: 11:33, 02 February 2014 (CDT)

Grass Hacking

Heh, like this page will ever be updated...

Project Introduction

I'm going to build a lawnmower.

Materials

Gear

Original gear dimensions:

• Diameter - 4.19cm
• Height - 3.26cm
• Ratio (Diam / Height) - 1.29

Required Drive Shaft Diameter - 0.80cm

Printed gear dimensions (at 800% scale):

• Diameter - 3cm
• Height - 2.62cm
• Drive shaft diam - 0.5cm
• Ratio (Diam / Height) - 1.15