Difference between revisions of "Cerealbot"

Revision as of 15:05, 21 January 2015

Overview

• Https://lh4.googleusercontent.com/-8p1jUPIQ2xQ/VI1gV38I7tI/AAAAAAAAFU8/nGnmlsH nhc/w1053-h702-no/IMG 5412.JPG

I am retrofitting a Printrbot Simple Metal 3D printer with tools to allow for serialized printing. Then I hope to release the use of it to schools. For Free.

Contributors

People who have helped make this happen:

Phillip Showers
Tyler Crumpton
Hunter Fuller

Thanks!

Software

Network

IP address: 10.56.1.34

Hostname: bns-daedalus.256.makerslocal.org

Public URL: cerealbox.256.makerslocal.org

Services: HTTP-80, WEBCAM-8080

Slic3r Config

Cereally Automated Build System

The testbed for train_rec was a success. Rather than use the length of the pop-bar as a lever to pry the piece off of the bed, I think its better to twist the bar along the length to push the 3d printed part up.

Milling the "production/testing" bed is next on the list.

Current Configuration

Plans

Printed Upgrades

Images incoming.

• Extruder Fan Duct
• Filament Guard
• Filament Clips
• Spool Stand
• Filament Cleaner

Upgrades to be printed:

• Fan mounts for motors
• GT2 belt mounts for print bed?

Printed Parts

Project Cost Breakdown

Does not include existing things that I own which have been purposed for this project.

dd-mm-yyyy

• 28-11-2014
  • Printrbot Simple Metal Unassembled - $539.00
  • Filament - $22.50

• 11-12-2014
  • Filament - $19.96
  • Filament - $19.89

• 14-12-2014
  • Kapton Tape - $17.99
  • Extruder Fan - $6.13
  • Extruder Fan 2 - $5.95
  • 8 Channel Relay - $9.99
    • Went missing x(
  • 12V Power Supply - $22.14
  • Hot Bed - $19.99

Project Cost: $683.54

External Resources

Parts

Amazon is an OK outlet for GT2 gear/belt parts for the X-Y motion

Source for 2-3mm Hex Bolts like those used in the simple metal

MISC

ctag's G+ Image Album

Printrbot initial config guide

Protoparadigm plastic I'm interested in