Difference between revisions of "User:Omegix/Notes/Amateur Radio"
From Makers Local 256
(→Outernet: added custom pdf template) |
m (→Outernet: adding link for installing outernet on linux) |
||
Line 7: | Line 7: | ||
** Height of patch from reflector: 7 mm | ** Height of patch from reflector: 7 mm | ||
** Had a pdf created of the design so people can print out their own template: https://owncloud.makerslocal.org/index.php/s/bvscCSrm6QXKAR9 | ** Had a pdf created of the design so people can print out their own template: https://owncloud.makerslocal.org/index.php/s/bvscCSrm6QXKAR9 | ||
+ | * Outernet Software Installation | ||
+ | ** https://media.readthedocs.org/pdf/outernet-l-band-on-linux/latest/outernet-l-band-on-linux.pdf |
Revision as of 21:47, 12 February 2018
Outernet
- DIY Lband Outernet Patch Panel: https://www.rtl-sdr.com/building-and-testing-an-l-band-patch-antenna-for-inmarsat-c-reception/
- Reflector Size: 170 mm x 170 mm
- Patch Size: 98 mm x 98 mm
- Corner Trim: 21 mm from top right and bottom left corners
- Coax Connection (Probe): 25 mm from bottom edge
- Height of patch from reflector: 7 mm
- Had a pdf created of the design so people can print out their own template: https://owncloud.makerslocal.org/index.php/s/bvscCSrm6QXKAR9
- Outernet Software Installation