Difference between revisions of "User:Omegix/Notes/Amateur Radio"
From Makers Local 256
(→Outernet: adding note about how to update the vagrant file) |
(→Outernet: adding link for bias T) |
||
| Line 1: | Line 1: | ||
== Outernet == | == Outernet == | ||
| + | * RTL-SDR | ||
| + | ** Super shitty MCX connector. Replacing with SMA. | ||
| + | ** Need to hack a bias T onto the board: https://www.rtl-sdr.com/rtl-sdr-bias-tee-hack/ | ||
* DIY Lband Outernet Patch Panel: https://www.rtl-sdr.com/building-and-testing-an-l-band-patch-antenna-for-inmarsat-c-reception/ | * DIY Lband Outernet Patch Panel: https://www.rtl-sdr.com/building-and-testing-an-l-band-patch-antenna-for-inmarsat-c-reception/ | ||
** Reflector Size: 170 mm x 170 mm | ** Reflector Size: 170 mm x 170 mm | ||
Revision as of 00:37, 17 February 2018
Outernet
- RTL-SDR
- Super shitty MCX connector. Replacing with SMA.
- Need to hack a bias T onto the board: https://www.rtl-sdr.com/rtl-sdr-bias-tee-hack/
- DIY Lband Outernet Patch Panel: https://www.rtl-sdr.com/building-and-testing-an-l-band-patch-antenna-for-inmarsat-c-reception/
- Reflector Size: 170 mm x 170 mm
- Patch Size: 98 mm x 98 mm
- Corner Trim: 21 mm from top right and bottom left corners
- Coax Connection (Probe): 25 mm from bottom edge
- Height of patch from reflector: 7 mm
- Had a pdf created of the design so people can print out their own template: https://owncloud.makerslocal.org/index.php/s/bvscCSrm6QXKAR9
- Outernet Software Installation
- https://media.readthedocs.org/pdf/outernet-l-band-on-linux/latest/outernet-l-band-on-linux.pdf
- you will need to add this to the vagrant file: Vagrant::DEFAULT_SERVER_URL.replace('https://vagrantcloud.com')
- https://media.readthedocs.org/pdf/outernet-l-band-on-linux/latest/outernet-l-band-on-linux.pdf
