Difference between revisions of "User:Enabrintain/PrinterbotMod"
From Makers Local 256
Enabrintain (Talk | contribs) (→Reference: fan mount links) |
Enabrintain (Talk | contribs) (→Reference: added cable chain) |
||
| Line 41: | Line 41: | ||
* [https://help.prusa3d.com/l/en/article/0SeHT5uEBp-mk-3-einsy-mini-ram-bo-electronics-wiring Wiring Instructions] | * [https://help.prusa3d.com/l/en/article/0SeHT5uEBp-mk-3-einsy-mini-ram-bo-electronics-wiring Wiring Instructions] | ||
| + | ==Plastic Parts== | ||
* [https://www.youmagine.com/designs/printrbot-blower-fan-mounts Plus Blower Mount] | * [https://www.youmagine.com/designs/printrbot-blower-fan-mounts Plus Blower Mount] | ||
* [https://www.youmagine.com/designs/printrbot-hot-end-fan Ubis Fan mount for Plus] | * [https://www.youmagine.com/designs/printrbot-hot-end-fan Ubis Fan mount for Plus] | ||
| − | + | * [https://www.youmagine.com/designs/printrbot-metal-plus-cable-chain cable chain] | |
[[Category:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | [[Category:Open manufacturing]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | ||
Revision as of 14:23, 25 September 2018
|
Creator: |
Contents
[hide]Overview
My Printrbot Simple Metal Plus stopped working. First the autoleveling sensor pin got locked closed, making it so that leveling was no longer a thing. Then the board stopped talking to the USB ports on my computer.
So I have decided to retire the Printrboard Rev. F4 with an Ultimachine Einsy Rambo. This is the same controller that drives the Prusa I3 Mk3 printers, so I'm pretty hopeful about finding good Marlin configs and whatnot. I'll be documenting my progress here.
Tools
Purchased Parts
Ordered Parts
Timeline
Tuesday 25 September, 2018
- Ordered PINDA Probe, ETA: a week? Its coming from canada via fedex. so probably less than that.
- Prusa uses a 3 wire blower fan for the print vent and a 40mm 3 wire Noctua fan for the extruder cooler. However the printrbot needs a 30mm fan to fit the mount, and Noctua doesnt make 3cm fans. OH WELL.
Monday 24 September, 2018
- Ultimachine responded telling me that the Einsy expects to use the Prusa PINDA probe. The PINDA is a NPN that runs on 5V. The LJ12A3-4-Z/BY is a 6V-36V PNP sensor. So is wholly unsuitable for swapping. Acquire a PINDA probe.
Saturday 22 September, 2018
- Swapped the connectors for the X, Y, Z0/1, and E steppers
- Wired 12V power (contemplate a higher voltage supply, the einsy can use 12V-24V DC, 16A+. Mine is a 12V DC, 10A)
- Made connector adapters for Extruder Thermistor, Fan (contemplate buying better fan), X,Y endstops
- Researched the applicability of the LJ12A3-4-Z/BY z-probe used by the Metal Plus in the Einsy. Sent Email to Ultimachine.
