Difference between revisions of "Shop Table"
From Makers Local 256
(populate materials list) |
(setup framework for assembly instructions) |
||
| Line 18: | Line 18: | ||
* 2"x4"x38.5" [4] (short/middle shelf supports) | * 2"x4"x38.5" [4] (short/middle shelf supports) | ||
| + | ==Assembly== | ||
| + | ===Top Frame=== | ||
| + | ===Legs=== | ||
| + | ===Shelf Frame=== | ||
| + | ===Shelf=== | ||
| + | ===Top=== | ||
[[Category:Put Category Here]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | [[Category:Put Category Here]] <!--MAKE AS MANY CATEGORIES AS YOU NEED--> | ||
Revision as of 22:16, 1 May 2009
|
Creator: |
Contents
[hide]Overview
This is the official design for stool height shop tables with dry-erasable tops. The end cost is targeted to be somewhere around $80.
Materials List
- 2"x4"x40" [6] (legs)
- 2"x4"x47.5" [2] (short MDF supports)
- 2"x4"x44.5" [2] (middle MDF supports)
- 2"x4"x92.5" [2] (long MDF supports)
- 4'x8'x0.75" MDF [1] (base table surface)
- 4'x8' dry-erase showerboard material [1] (replacable top surface)
- 2"x4"x89.5" [2] (long shelf supports)
- 2"x4"x38.5" [4] (short/middle shelf supports)
