Difference between revisions of "Shop Checklist"
From Makers Local 256
m (Updating shop checklist as I see fit.) |
m (fixed a tiny wrong word) |
||
| (2 intermediate revisions by one user not shown) | |||
| Line 4: | Line 4: | ||
''Last to leave?'' | ''Last to leave?'' | ||
| + | |||
'''CLOSE UP THE SHOP''' | '''CLOSE UP THE SHOP''' | ||
| − | + | # Lower the '''overhead door''' and lock the deadbolt on the '''back door''' | |
| − | + | # Turn off large '''exhaust fan''' | |
| − | + | #*(2 breakers labeled in breaker box) | |
| − | + | # Turn off any auxiliary '''fans or heaters''' around the shop. | |
| − | + | # Check for any '''running equipment''' and ensure that it is off. | |
| − | + | #*(laser cutter, soldering irons, water faucets, monitors, etc.) | |
| − | + | # Turn off all '''A/C units''' | |
| − | + | #*(Office, Fab Lab, above the lobby) | |
| − | + | # Turn off '''lights''' | |
| − | + | #*(main room, under loft, kitchen, lobby, office, etc.) | |
| − | + | # exit through '''front door''', ensuring that it locks behind you | |
| − | + | #*(and/or pressing the lock button on the outside.) | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Thank you for making Makers Local 256 great! | Thank you for making Makers Local 256 great! | ||
| Line 33: | Line 27: | ||
''Last to leave?'' | ''Last to leave?'' | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | '''CLOSE UP THE SHOP''' | |
| − | + | ||
| − | + | # Lock the '''front door''' | |
| − | + | # Turn off '''lights''' | |
| + | #*(office, lobby, kitchen, under loft, etc.) | ||
| + | # Turn off all '''A/C units''' | ||
| + | #*(Office, Fab Lab, above the lobby) | ||
| + | # Turn off any auxiliary '''fans or heaters''' around the shop. | ||
| + | # Check for any '''running equipment''' and ensure that it is off. | ||
| + | #*(laser cutter, soldering irons, water faucets, monitors, etc.) | ||
| + | # Turn off large '''exhaust fan''' | ||
| + | #*(2 breakers labeled in breaker box) | ||
| + | # Turn off '''main room lights''' | ||
| + | #*(switch next to back door) | ||
| + | # Lock the deadbolt on the '''back door''' and lower the '''overhead door'''. | ||
| + | #*(CAREFULLY ducking under it before it shuts) | ||
Thank you for making Makers Local 256 great! | Thank you for making Makers Local 256 great! | ||
Latest revision as of 17:22, 16 October 2013
Checklist for leaving the shop. This should be posted in a prominent place when leaving the shop.
For the front door
Last to leave?
CLOSE UP THE SHOP
- Lower the overhead door and lock the deadbolt on the back door
- Turn off large exhaust fan
- (2 breakers labeled in breaker box)
- Turn off any auxiliary fans or heaters around the shop.
- Check for any running equipment and ensure that it is off.
- (laser cutter, soldering irons, water faucets, monitors, etc.)
- Turn off all A/C units
- (Office, Fab Lab, above the lobby)
- Turn off lights
- (main room, under loft, kitchen, lobby, office, etc.)
- exit through front door, ensuring that it locks behind you
- (and/or pressing the lock button on the outside.)
Thank you for making Makers Local 256 great!
Second to last to leave? Let the last person know that they are it.
For the back door
Last to leave?
CLOSE UP THE SHOP
- Lock the front door
- Turn off lights
- (office, lobby, kitchen, under loft, etc.)
- Turn off all A/C units
- (Office, Fab Lab, above the lobby)
- Turn off any auxiliary fans or heaters around the shop.
- Check for any running equipment and ensure that it is off.
- (laser cutter, soldering irons, water faucets, monitors, etc.)
- Turn off large exhaust fan
- (2 breakers labeled in breaker box)
- Turn off main room lights
- (switch next to back door)
- Lock the deadbolt on the back door and lower the overhead door.
- (CAREFULLY ducking under it before it shuts)
Thank you for making Makers Local 256 great!
Second to last to leave? Let the last person know that they are it.
