Difference between revisions of "Reprap/Mendel"
From Makers Local 256
< Reprap
(→Progress: Added latest findings.) |
(→Progress: yay updates!) |
||
| Line 23: | Line 23: | ||
** Cost: $220 shipping included. | ** Cost: $220 shipping included. | ||
* 11:50, 8 April 2010 (CDT) Gathered two stepper motors with a 0.9 degree/step rating that might work for the X and Y axis. | * 11:50, 8 April 2010 (CDT) Gathered two stepper motors with a 0.9 degree/step rating that might work for the X and Y axis. | ||
| + | * [[User:Enabrintain|Phil]] says he has all the bearings needed and is willing to use the electronics from the Makerbot Cupcake CNC that he bought to get one built. It was his original plan. We also might have another person willing to help in the building experience. --[[User:Strages|strages]] 22:20, 13 September 2010 (CDT) | ||
==Resources== | ==Resources== | ||
Revision as of 22:20, 13 September 2010
|
Creator: |
Contents
[hide]Overview
A 3D printer capable of printing parts to make another identical 3D printer.
The Plan
- I'd like to use 3rd generation electronics, namely what the Makerbot Cupcake CNC is using, just to stay ahead of the curve.
- Heated bed to allow for a wider variety of printing medium usage and to prevent warping of the printed objects.
- Different heads after the initial build to give it some added flexibility/capability. See Options section for more details.
Options
Progress
- 11:18, 23 March 2010 (CDT) : Plastic structural parts printed on another reprap located in the Czech Republic have been obtained.
- Cost: $220 shipping included.
- 11:50, 8 April 2010 (CDT) Gathered two stepper motors with a 0.9 degree/step rating that might work for the X and Y axis.
- Phil says he has all the bearings needed and is willing to use the electronics from the Makerbot Cupcake CNC that he bought to get one built. It was his original plan. We also might have another person willing to help in the building experience. --strages 22:20, 13 September 2010 (CDT)
