Difference between revisions of "Open Manufacturing talk"
From Makers Local 256
Enabrintain (Talk | contribs) m (→2x4 CNC Machine: minor correction) |
Enabrintain (Talk | contribs) m (→MakerBot (cupcake): minor addition) |
||
Line 11: | Line 11: | ||
==MakerBot (cupcake)== | ==MakerBot (cupcake)== | ||
− | # Find design on [http://www.thingiverse.com/ Thingiverse] | + | # Find design(STL) on [http://www.thingiverse.com/ Thingiverse] |
# Open in [http://replicat.org/ Replicator G] | # Open in [http://replicat.org/ Replicator G] | ||
# Zero Extruder, raise 10mm | # Zero Extruder, raise 10mm | ||
Line 26: | Line 26: | ||
[http://wiki.bitsfrombytes.com/index.php/Skeinforge#Settings Skeinforge Settings] | [http://wiki.bitsfrombytes.com/index.php/Skeinforge#Settings Skeinforge Settings] | ||
− | |||
==[[2x4 CNC Machine]]== | ==[[2x4 CNC Machine]]== |
Revision as of 18:45, 8 August 2011
Creator: |
Overview
This is the class/talk Notes page for Phil's How to use the Shop's Various CNC tools Class.
MakerBot (cupcake)
- Find design(STL) on Thingiverse
- Open in Replicator G
- Zero Extruder, raise 10mm
- Pre-Heat Extruder and Heated bed
- Generate G-Code
- Edit G-Code (remove pre-heating section, find/replace the extrusion pauses (M103) )
- Print!
Links
2x4 CNC Machine
- Find DXF (Thingiverse, or elsewhere (cnc zone is a good place)
- Open DXF in LazyCam
- Select Layer to cut
- Generate Offset layer
- Assign Toolhead to layers
- Assign material thickness
- Generate G-Code
- Open G-Code in Mach3-Mill
- MAKE SURE SCALES ARE LOADED
- Center mill
- Start Cutting
Reprap/Mendel
- Nothing here yet!