Difference between revisions of "4x8 CNC Machine"

Revision as of 09:46, 18 May 2012

Overview

This is the project page of a CNC capable of milling 4' x 8' plywood sheets. Update: I have ordered a 52" x 104" (area) Plasma cutting table from eagleplasma. Updates to follow below:

Status

• 10or11 May 12: Ordered CNC Kit from eagleplasma.com
• 16 May 12: Kit arrived in 3 boxes (145#, 145#, 95#) - I like to call them Huey, Duey, and Louie
• 18 May 12: ASSEMBLY

Design Notes

• Able to fully access an entire 4' x 8' plywood sheet
• Able to be moved
• Belt driven (screw drives are buggy, albeit more accurate)

Links to Cuttable Pattern Resources

• Shelter 2.0
• Open Design Furniture
• More Open Design Furniture
• Necessary Thingiverse link
• mashup for routers
• Neat CNC chair
• Necessary link to cnczone
• single sheet canoe
• single sheet stairs
• single sheet canoe
• WikiHouse

Links to CNC Machine Resources

• A small company building hobby plasma cncs
• Contraptor
• flexible manufacturing system
• Build Your CNC (a distant relative of the 2x4 CNC Machine) *closed source
• Mechmate *closed source
• neo7 cnc
• 80/20 Ebay store

Assembly Pics

Crate Contents

The crates arrived! the vertical one weighed 95lbs, and the two horizontal ones were 140lbs!	The Gantry box without its cardboard. see the dalek in the background?	The contents of the gantry crate.	The cnc table crate, marked 'bottom'
The cnc table crate contents, marked 'bottom'	The cnc table crate, marked 'top'	The cnc table crate contents, marked 'top'

Concerns

Of concern: The ground is not connected

Of concern: The power wires seem a bit thin...

Bill of Materials

This may be put on hold...