Difference between revisions of "Ceramic Kiln"
From Makers Local 256
Enabrintain (Talk | contribs) m (→Added suggestions) |
Enabrintain (Talk | contribs) m (→Added link to Kiln Firing Log) |
||
| Line 9: | Line 9: | ||
* [https://256.makerslocal.org/wiki/Ceramic_Kiln/Controller Arduino based Kiln Controller] | * [https://256.makerslocal.org/wiki/Ceramic_Kiln/Controller Arduino based Kiln Controller] | ||
* [https://256.makerslocal.org/wiki/Ceramic_Kiln/Gallery Gallery of kiln related pictures] | * [https://256.makerslocal.org/wiki/Ceramic_Kiln/Gallery Gallery of kiln related pictures] | ||
| + | * [https://256.makerslocal.org/wiki/Ceramic_Kiln/Firing_Log Firing Log] | ||
| + | |||
==Overview== | ==Overview== | ||
Revision as of 09:18, 19 February 2013
|
Creator: |
Also see:
Overview
This is where we can hang info on the Pottery Kiln.
About the Kiln: The Makers Local 256 kiln is an Evenheat model 4320.
- It is capable of firing to 2300F or Cone 8.
- It uses a KilnSitter kiln controller that has a bad timer and 4 zones controllable via light switches.
- It uses a 220v, 24A breaker.
Directions / Suggestions
So you wanna make a ceramic thing...
Congratulations! Admitting it is the first step!
Clay (getting it)
- Currently we are sourcing clay from Hobby Lobby.
Throwing (using the potters wheel)
- The people who donated the kiln also donated a motorized potters wheel.
Drying / Candling
Firing
