Difference between revisions of "Laser cutter"

Revision as of 20:54, 13 April 2014

Creator:
Enabrintain
Status:
Research
Born On:
13:55, 1 November 2011 (CDT)
Last Updated:
20:54, 13 April 2014 (CDT)

This page is a Research page for hanging data on Laser Cutting.

I like the idea of playing with laser diodes on the 2x4 CNC Machine. Applications that spring to mind are: PCB Stencils(for Solder Paste Stenciling), and Other stencils.

The guy at Buildlog is my hero.(Mach3 Laser Cutter Setup)
- This page shows how to convert gCode to a signal on pin one of the parallel port.
- I will need to divert pin 1 or possibly look for where it goes on the motor driver board.
PCB Stencil Materials
This page seems to be exhaustive regarding the construction of low amperage diode laser drivers.

@@ Line 11: / Line 11: @@
 This page is a Research page for hanging data on Laser Cutting.
+==Laser Diode Cutting==
+I like the idea of playing with laser diodes on the [[2x4 CNC Machine]]. Applications that spring to mind are: [http://www.ladyada.net/library/laser/pcbstencils.html PCB Stencils](for [http://www.sparkfun.com/tutorials/58 Solder Paste Stenciling]), and Other stencils.
+* [http://www.buildlog.net/blog/2010/07/mach3-laser-cutter-setup/ The guy at Buildlog is my hero.](Mach3 Laser Cutter Setup)
+** This page shows how to convert gCode to a signal on pin one of the parallel port.
+** I will need to divert pin 1 or possibly look for where it goes on the motor driver board.
+* [http://www.mcmaster.com/#2271k2/=equrzu PCB Stencil Materials]
+* [http://www.rog8811.com/laserdriver.htm This page] seems to be exhaustive regarding the construction of low amperage diode laser drivers.
 ==SrsBizness Laser Cutting==