Ceramic Kiln
From Makers Local 256
Revision as of 09:48, 19 February 2013 by Enabrintain (Talk | contribs)
|
Creator: |
Also see:
Overview
This is where we can hang info on the Pottery Kiln.
About the Kiln: The Makers Local 256 kiln is an Evenheat model 4320.
- It is capable of firing to 2300F or Cone 8.
- It uses a KilnSitter kiln controller that has a bad timer and 4 zones controllable via light switches.
- It uses a 220v, 24A breaker.
Directions / Suggestions
So you wanna make a ceramic thing...
Congratulations! Admitting it is the first step!
Clay (getting it)
- Currently we are sourcing clay from Hobby Lobby.
Throwing (using the potters wheel)
- The people who donated the kiln also donated a motorized potters wheel.
Drying / Candling
Firing
